[PATCH 3/4] arm64: dts: qcom: msm8916: normalize I2C bindings

[Damien Riegel]

The QUP core can be used either for I2C or SPI, so the same IP is mapped
by a driver or the other. SPI bindings use a leading 0 for the start
address and a size of 0x600, I2C bindings don't have the leading 0 and
have a size 0x1000.

To make them more similar, add the leading 0 to I2C bindings and changes
the size to 0x600, as the driver only accesses registers up to address
0x408. Also align the second entry of the clocks array.

Signed-off-by: Damien Riegel <damien.riegel at savoirfairelinux.com>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index e16ba8334518..de25bd6070f5 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -457,10 +457,10 @@
 
 		blsp_i2c2: i2c at 78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x78b6000 0x1000>;
+			reg = <0x078b6000 0x600>;
 			interrupts = <GIC_SPI 96 0>;
 			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+				 <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&i2c2_default>;
@@ -472,10 +472,10 @@
 
 		blsp_i2c4: i2c at 78b8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x78b8000 0x1000>;
+			reg = <0x078b8000 0x600>;
 			interrupts = <GIC_SPI 98 0>;
 			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				<&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
+				 <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&i2c4_default>;
@@ -487,10 +487,10 @@
 
 		blsp_i2c6: i2c at 78ba000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x78ba000 0x1000>;
+			reg = <0x078ba000 0x600>;
 			interrupts = <GIC_SPI 100 0>;
 			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				<&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+				 <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&i2c6_default>;
-- 
2.15.0