[PATCH v5 04/30] arm64: KVM: Hide unsupported AArch64 CPU features from guests

[Dave Martin]

On Wed, Nov 01, 2017 at 05:47:29AM +0100, Christoffer Dall wrote:
> On Tue, Oct 31, 2017 at 03:50:56PM +0000, Dave Martin wrote:
> > Currently, a guest kernel sees the true CPU feature registers
> > (ID_*_EL1) when it reads them using MRS instructions.  This means
> > that the guest may observe features that are present in the
> > hardware but the host doesn't understand or doesn't provide support
> > for.  A guest may legimitately try to use such a feature as per the
> > architecture, but use of the feature may trap instead of working
> > normally, triggering undef injection into the guest.
> > 
> > This is not a problem for the host, but the guest may go wrong when
> > running on newer hardware than the host knows about.
> > 
> > This patch hides from guest VMs any AArch64-specific CPU features
> > that the host doesn't support, by exposing to the guest the
> > sanitised versions of the registers computed by the cpufeatures
> > framework, instead of the true hardware registers.  To achieve
> > this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation
> > code is added to KVM to report the sanitised versions of the
> > affected registers in response to MRS and register reads from
> > userspace.
> > 
> > The affected registers are removed from invariant_sys_regs[] (since
> > the invariant_sys_regs handling is no longer quite correct for
> > them) and added to sys_reg_desgs[], with appropriate access(),
> > get_user() and set_user() methods.  No runtime vcpu storage is
> > allocated for the registers: instead, they are read on demand from
> > the cpufeatures framework.  This may need modification in the
> > future if there is a need for userspace to customise the features
> > visible to the guest.
> > 
> > Attempts by userspace to write the registers are handled similarly
> > to the current invariant_sys_regs handling: writes are permitted,
> > but only if they don't attempt to change the value.  This is
> > sufficient to support VM snapshot/restore from userspace.
> > 
> > Because of the additional registers, restoring a VM on an older
> > kernel may not work unless userspace knows how to handle the extra
> > VM registers exposed to the KVM user ABI by this patch.
> > 
> > Under the principle of least damage, this patch makes no attempt to
> > handle any of the other registers currently in
> > invariant_sys_regs[], or to emulate registers for AArch32: however,
> > these could be handled in a similar way in future, as necessary.
> > 
> > Signed-off-by: Dave Martin <Dave.Martin at arm.com>
> > Reviewed-by: Marc Zyngier <marc.zyngier at arm.com>
> > Acked-by: Catalin Marinas <catalin.marinas at arm.com>
> > Cc: Christoffer Dall <christoffer.dall at linaro.org>
> > ---
> >  arch/arm64/include/asm/sysreg.h |   3 +
> >  arch/arm64/kvm/hyp/switch.c     |   6 +
> >  arch/arm64/kvm/sys_regs.c       | 282 +++++++++++++++++++++++++++++++++-------
> >  3 files changed, 246 insertions(+), 45 deletions(-)
> > 
> > diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
> > index 4dceb12..609d59af 100644
> > --- a/arch/arm64/include/asm/sysreg.h
> > +++ b/arch/arm64/include/asm/sysreg.h
> > @@ -149,6 +149,9 @@
> >  #define SYS_ID_AA64DFR0_EL1		sys_reg(3, 0, 0, 5, 0)
> >  #define SYS_ID_AA64DFR1_EL1		sys_reg(3, 0, 0, 5, 1)
> >  
> > +#define SYS_ID_AA64AFR0_EL1		sys_reg(3, 0, 0, 5, 4)
> > +#define SYS_ID_AA64AFR1_EL1		sys_reg(3, 0, 0, 5, 5)
> > +
> >  #define SYS_ID_AA64ISAR0_EL1		sys_reg(3, 0, 0, 6, 0)
> >  #define SYS_ID_AA64ISAR1_EL1		sys_reg(3, 0, 0, 6, 1)
> >  
> > diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
> > index 945e79c..35a90b8 100644
> > --- a/arch/arm64/kvm/hyp/switch.c
> > +++ b/arch/arm64/kvm/hyp/switch.c
> > @@ -81,11 +81,17 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
> >  	 * it will cause an exception.
> >  	 */
> >  	val = vcpu->arch.hcr_el2;
> > +
> >  	if (!(val & HCR_RW) && system_supports_fpsimd()) {
> >  		write_sysreg(1 << 30, fpexc32_el2);
> >  		isb();
> >  	}
> > +
> > +	if (val & HCR_RW) /* for AArch64 only: */
> > +		val |= HCR_TID3; /* TID3: trap feature register accesses */
> > +
> 
> I still think we should set this in vcpu_reset_hcr() and do it once
> instead of adding code in every iteration of the critical path.

Dang, I somehow missed this in the last round.

How about:

diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
index e5df3fc..c87be0d 100644
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -49,6 +49,14 @@ static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
 		vcpu->arch.hcr_el2 |= HCR_E2H;
 	if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features))
 		vcpu->arch.hcr_el2 &= ~HCR_RW;
+
+	/*
+	 * TID3: trap feature register accesses that we virtualise.
+	 * For now this is conditional, since no AArch32 feature regs
+	 * are currently virtualised.
+	 */
+	if (vcpu->arch.hcr_el2 & HCR_RW)
+		vcpu->arch.hcr_el2 |= HCR_TID3;
 }
 
 static inline unsigned long vcpu_get_hcr(struct kvm_vcpu *vcpu)
> 
> Otherwise this patch looks good to me.

I'll probably post this as a separate follow-up patch, unless there's
some other reason for a full respin.

Cheers
---Dave