[PATCH v2 06/11] dt-bindings: cp110: introduce a new binding

[Gregory CLEMENT]

This patch updates the documentation according to the change made in the
patch "pinctrl: dt-bindings: cp110: introduce a new binding".

Acked-by: Rob Herring <robh at kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
---
 Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
index 47f1cf800e25..139e46cc6786 100644
--- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
@@ -7,6 +7,13 @@ Controller 0 and System Controller 1. This Device Tree binding allows
 to describe the first system controller, which provides registers to
 configure various aspects of the SoC.
 
+For the top level node:
+ - compatible: must be: "syscon", "simple-mfd";
+ - reg: register area of the CP110 system controller 0
+
+Clocks:
+-------
+
 The Device Tree node representing this System Controller 0 provides a
 number of clocks:
 
@@ -56,14 +63,17 @@ The following clocks are available:
 Required properties:
 
  - compatible: must be:
-     "marvell,cp110-system-controller0", "syscon";
- - reg: register area of the CP110 system controller 0
+     "marvell,cp110-clock"
  - #clock-cells: must be set to 2
 
 Example:
 
 	cpm_syscon0: system-controller at 440000 {
-		compatible = "marvell,cp110-system-controller0", "syscon";
+		compatible = "syscon", "simple-mfd";
 		reg = <0x440000 0x1000>;
-		#clock-cells = <2>;
+
+		cpm_clk: clock {
+			compatible = "marvell,cp110-clock";
+			#clock-cells = <2>;
+		};
 	};
-- 
git-series 0.9.1