[PATCH v9 5/7] ACPI: Translate the I/O range of non-MMIO devices before scanning
Gabriele Paoloni
gabriele.paoloni at huawei.com
Wed May 31 03:24:47 PDT 2017
Hi Lorenzo
Many thanks for reviewing
> -----Original Message-----
> From: Lorenzo Pieralisi [mailto:lorenzo.pieralisi at arm.com]
> Sent: 30 May 2017 14:24
> To: Gabriele Paoloni
> Cc: catalin.marinas at arm.com; will.deacon at arm.com; robh+dt at kernel.org;
> frowand.list at gmail.com; bhelgaas at google.com; rafael at kernel.org;
> arnd at arndb.de; linux-arm-kernel at lists.infradead.org;
> mark.rutland at arm.com; brian.starkey at arm.com; olof at lixom.net;
> benh at kernel.crashing.org; linux-kernel at vger.kernel.org; linux-
> acpi at vger.kernel.org; Linuxarm; linux-pci at vger.kernel.org;
> minyard at acm.org; John Garry; xuwei (O)
> Subject: Re: [PATCH v9 5/7] ACPI: Translate the I/O range of non-MMIO
> devices before scanning
>
> Hi Gab,
>
> On Thu, May 25, 2017 at 12:37:26PM +0100, Gabriele Paoloni wrote:
> > From: Gabriele <gabriele.paoloni at huawei.com>
> >
> > On some platforms(such as Hip06/Hip07), the legacy ISA/LPC devices
> access
> > I/O with some special host-local I/O ports known on x86. As their I/O
> > space are not memory mapped like PCI/PCIE MMIO host bridges, this
> patch is
> > meant to support a new class of I/O host controllers where the local
> IO
> > ports of the children devices are translated into the Indirect I/O
> address
> > space.
> > Through the handler attach callback, all the I/O translations are
> done
> > before starting the enumeration on children devices and the
> translated
> > addresses are replaced in the children resources.
>
> I do not understand why this is done through a scan handler and to
> be frank I do not see how this mechanism is supposed to be a generic
> kernel layer, possibly used by other platforms, when there is no notion
> in ACPI to cater for that.
Well, the main reason is that we need to translate the bus addresses of
the LPC children before the respective children's drivers probe.
>
> As far as I am concerned this patch code should live in the Hisilicon
> LPC driver - as things stand it is neither ACPI generic code nor ARM64
> specific, it is code to make ACPI work like DT bindings without any
> ACPI
> binding at all; I still have some concerns from an ACPI standpoint
> below.
Well the reason why this patch cannot live in the LPC driver probe is
that AFAIK currently there is no way to guarantee the LPC probe to be
called before the children probe. With respect to the ACPI concerns
please see below.
>
> > Signed-off-by: zhichang.yuan <yuanzhichang at hisilicon.com>
> > Signed-off-by: Gabriele Paoloni <gabriele.paoloni at huawei.com>
> > ---
> > drivers/acpi/arm64/Makefile | 1 +
> > drivers/acpi/arm64/acpi_indirect_pio.c | 301
> +++++++++++++++++++++++++++++++++
> > drivers/acpi/internal.h | 5 +
> > drivers/acpi/scan.c | 1 +
> > include/acpi/acpi_indirect_pio.h | 24 +++
> > 5 files changed, 332 insertions(+)
> > create mode 100644 drivers/acpi/arm64/acpi_indirect_pio.c
> > create mode 100644 include/acpi/acpi_indirect_pio.h
> >
> > diff --git a/drivers/acpi/arm64/Makefile
> b/drivers/acpi/arm64/Makefile
> > index 1017def..3944775 100644
> > --- a/drivers/acpi/arm64/Makefile
> > +++ b/drivers/acpi/arm64/Makefile
> > @@ -1,2 +1,3 @@
> > obj-$(CONFIG_ACPI_IORT) += iort.o
> > obj-$(CONFIG_ACPI_GTDT) += gtdt.o
> > +obj-$(CONFIG_INDIRECT_PIO) += acpi_indirect_pio.o
> > diff --git a/drivers/acpi/arm64/acpi_indirect_pio.c
> b/drivers/acpi/arm64/acpi_indirect_pio.c
> > new file mode 100644
> > index 0000000..7813f73
> > --- /dev/null
> > +++ b/drivers/acpi/arm64/acpi_indirect_pio.c
> > @@ -0,0 +1,301 @@
> > +/*
> > + * ACPI support for indirect-PIO bus.
> > + *
> > + * Copyright (C) 2017 Hisilicon Limited, All Rights Reserved.
> > + * Author: Gabriele Paoloni <gabriele.paoloni at huawei.com>
> > + * Author: Zhichang Yuan <yuanzhichang at hisilicon.com>
> > + *
> > + * This program is free software; you can redistribute it and/or
> modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#include <linux/acpi.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/logic_pio.h>
> > +
> > +#include <acpi/acpi_indirect_pio.h>
> > +
> > +ACPI_MODULE_NAME("indirect PIO");
> > +
> > +#define INDIRECT_PIO_INFO(desc) ((unsigned long)&desc)
> > +
> > +static acpi_status acpi_count_logic_iores(struct acpi_resource *res,
> > + void *data)
> > +{
> > + int *res_cnt = data;
> > +
> > + if (!acpi_dev_filter_resource_type(res, IORESOURCE_IO))
> > + (*res_cnt)++;
> > +
> > + return AE_OK;
> > +}
> > +
> > +static acpi_status acpi_read_one_logicpiores(struct acpi_resource
> *res,
> > + void *data)
> > +{
> > + struct acpi_resource **resource = data;
> > +
> > + if (!acpi_dev_filter_resource_type(res, IORESOURCE_IO)) {
> > + memcpy((*resource), res, sizeof(struct acpi_resource));
> > + (*resource)->length = sizeof(struct acpi_resource);
> > + (*resource)->type = res->type;
> > + (*resource)++;
> > + }
> > +
> > + return AE_OK;
> > +}
> > +
> > +static acpi_status
> > +acpi_build_logicpiores_template(struct acpi_device *adev,
> > + struct acpi_buffer *buffer)
> > +{
> > + acpi_handle handle = adev->handle;
> > + struct acpi_resource *resource;
> > + acpi_status status;
> > + int res_cnt = 0;
> > +
> > + status = acpi_walk_resources(handle, METHOD_NAME__CRS,
> > + acpi_count_logic_iores, &res_cnt);
> > + if (ACPI_FAILURE(status)) {
> > + dev_err(&adev->dev, "can't evaluate _CRS: %d\n", status);
> > + return -EINVAL;
> > + }
> > +
> > + if (!res_cnt) {
> > + dev_err(&adev->dev, "no logic IO resources\n");
> > + return -ENODEV;
> > + }
> > +
> > + buffer->length = sizeof(struct acpi_resource) * (res_cnt + 1);
> > + buffer->pointer = kzalloc(buffer->length, GFP_KERNEL);
> > + if (!buffer->pointer)
> > + return -ENOMEM;
> > +
> > + resource = (struct acpi_resource *)buffer->pointer;
> > + status = acpi_walk_resources(handle, METHOD_NAME__CRS,
> > + acpi_read_one_logicpiores, &resource);
> > + if (ACPI_FAILURE(status)) {
> > + kfree(buffer->pointer);
> > + dev_err(&adev->dev, "can't evaluate _CRS: %d\n", status);
> > + return -EINVAL;
> > + }
> > +
> > + resource->type = ACPI_RESOURCE_TYPE_END_TAG;
> > + resource->length = sizeof(struct acpi_resource);
> > +
> > + return 0;
> > +}
>
> IIUC correctly this code is here to count resources and replace them
> with kernel specific IO offsets and I think that's wrong. ACPI devices
> _CRS,_PRS,_SRS are set-up by firmware and by no means should be updated
> with resources that are basically Linux kernel internals specific.
>
> The problem you are facing is there because there is no way in ACPI
> to specify in FW what you want to describe but that's not a reason
> to make it work by other means.
Mmmm yes I agree with you about not touching the ACPI resources (that indeed
should reflect what we have in the ACPI tables).
However I was thinking that maybe we can have a scan handler that enumerate
the children devices and translate its addresses filling dev->resources[] and
at the same time we can modify acpi_default_enumeration to check
acpi_device_enumerated() before continuing with device enumeration...?
>
> [...]
>
> > + * update/set the current I/O resource of the designated device
> node.
> > + * after this calling, the enumeration can be started as the I/O
> resource
> > + * had been translated to logicial I/O from bus-local I/O.
> > + *
> > + * @adev: the device node to be updated the I/O resource;
> > + * @host: the device node where 'adev' is attached, which can be not
> > + * the parent of 'adev';
> > + *
> > + * return 0 when successful, negative is for failure.
> > + */
> > +int acpi_set_logic_pio_resource(struct device *child,
> > + struct device *hostdev)
> > +{
> > + struct acpi_device *adev;
> > + struct acpi_device *host;
> > + struct acpi_buffer buffer;
> > + acpi_status status;
> > + int ret;
> > +
> > + if (!child || !hostdev)
> > + return -EINVAL;
> > +
> > + host = to_acpi_device(hostdev);
> > + adev = to_acpi_device(child);
> > +
> > + /* check the device state */
> > + if (!adev->status.present) {
> > + dev_info(child, "ACPI: device is not present!\n");
> > + return 0;
> > + }
> > + /* whether the child had been enumerated? */
> > + if (acpi_device_enumerated(adev)) {
> > + dev_info(child, "ACPI: had been enumerated!\n");
> > + return 0;
> > + }
> > +
> > + /* read the _CRS and convert as acpi_buffer */
> > + status = acpi_build_logicpiores_template(adev, &buffer);
> > + if (ACPI_FAILURE(status)) {
> > + dev_warn(child, "Failure evaluating %s\n",
> METHOD_NAME__CRS);
> > + return -ENODEV;
> > + }
> > +
> > + /* translate the I/O resources */
> > + ret = acpi_translate_logicpiores(adev, host, &buffer);
> > + if (ret) {
> > + kfree(buffer.pointer);
> > + dev_err(child, "Translate I/O range FAIL!\n");
> > + return ret;
> > + }
> > +
> > + /* set current resource... */
> > + status = acpi_set_current_resources(adev->handle, &buffer);
>
> I reckon that this is wrong. You are updating ACPI device resources
> with
> kernel specific built resources (ie IO space offsets) made by slicing
> up
> IO space into the kernel available virtual address space offset
> allocated to it.
>
> IIUC this is done to make sure platform devices contains the
> "translated" resources by the time they are probed, it is hard
> to follow and again, not correct from an ACPI standpoint.
>
> Furthermore I have no idea how this code is supposed to be used by
> _any_ other platform, ACPI just has no notion of the translation you
> are carrying out here (which mirrors what's done in DT without any
> firmware binding to support it) so even if any other platform has
> the same requirements I have no idea how people developing FW may
> write their bindings to match these given that they just don't exist.
Agreed see proposal above
>
> > + kfree(buffer.pointer);
> > + if (ACPI_FAILURE(status)) {
> > + dev_err(child, "Error evaluating _SRS (0x%x)\n", status);
> > + ret = -EIO;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +/* All the host devices which apply indirect-PIO can be listed here.
> */
> > +static const struct acpi_device_id acpi_indirect_host_id[] = {
> > + {""},
>
> How can this be used by any other platform other than Hisilicon LPC ?
The pre_setup() callback is host specific. It would be used by any other
host that needs to enumerate its children with logic PIOs rather than bus
addresses
>
> Imagine for a minute you have an ARM64 platform with an LPC bus in it
> and you have to write ACPI tables to describe it, you may not want
> to start by reading Linux kernel code to understand how to do it.
Well you don't really need to do it. I agree that it is wrong to manipulate
directly the acpi resources; however the translation process would be
independent of the bus addresses to be used in the ACPI tables...
>
> This code is Hisilicon specific code (ie there is no ACPI binding to
> the best of my knowledge describing to FW developers an LPC binding)
> and on the ACPI side it makes assumptions that I am not sure are
> correct at all, see above.
>
> > +};
> > +
> > +static int acpi_indirectpio_attach(struct acpi_device *adev,
> > + const struct acpi_device_id *id)
> > +{
> > + struct indirect_pio_device_desc *hostdata;
> > + struct platform_device *pdev;
> > + int ret;
> > +
> > + hostdata = (struct indirect_pio_device_desc *)id->driver_data;
> > + if (!hostdata || !hostdata->pre_setup)
> > + return -EINVAL;
> > +
> > + ret = hostdata->pre_setup(adev, hostdata->pdata);
> > + if (!ret) {
> > + pdev = acpi_create_platform_device(adev, NULL);
>
> So, this is done through a scan handler for what reason ? Is this
> because you want this code to run before platform devices are created
> by ACPI core - so that you can update their resources in the
>
> struct indirect_pio_device_desc.pre_setup() method ?
>
> I suspect this is yet another probing order issue to solve but that's
> orthogonal to the comments I made above.
Correct :) see above
>
> To sum it up:
>
> (1) Creating an ARM64 ACPI standard kernel layer to parse something
> that is
> not an ACPI (let alone ARM64) standard does not make much sense to
> me,
> so either standard bindings are published for other partners to use
> them or this code belongs to Hisilicon specific LPC bus management
> (2) Even with (1), I have concerns about this patch ACPI resources
> handling, I really think it is wrong to update ACPI devices
> resources with something that is Linux kernel specific. I may
> understand building platform devices resources according to your
> LPC bus requirements but not updating ACPI device FW bindings with
> resources that are basically kernel internals.
On (2) I agree (please see proposal above)
On (1) I am not very sure about any binding needed at all...in the end
we are mapping a bus range into a virtual IO address space (Logic PIO)...
Cheers
Gab
>
> Thanks,
> Lorenzo
>
> > + if (IS_ERR_OR_NULL(pdev)) {
> > + dev_err(&adev->dev, "Create platform device for host
> FAIL!\n");
> > + return -EFAULT;
> > + }
> > + acpi_device_set_enumerated(adev);
> > + ret = 1;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +
> > +static struct acpi_scan_handler acpi_indirect_handler = {
> > + .ids = acpi_indirect_host_id,
> > + .attach = acpi_indirectpio_attach,
> > +};
> > +
> > +void __init acpi_indirectio_scan_init(void)
> > +{
> > + acpi_scan_add_handler(&acpi_indirect_handler);
> > +}
> > diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
> > index 66229ff..bf8aaf8 100644
> > --- a/drivers/acpi/internal.h
> > +++ b/drivers/acpi/internal.h
> > @@ -31,6 +31,11 @@ void acpi_processor_init(void);
> > void acpi_platform_init(void);
> > void acpi_pnp_init(void);
> > void acpi_int340x_thermal_init(void);
> > +#ifdef CONFIG_INDIRECT_PIO
> > +void acpi_indirectio_scan_init(void);
> > +#else
> > +static inline void acpi_indirectio_scan_init(void) {}
> > +#endif
> > #ifdef CONFIG_ARM_AMBA
> > void acpi_amba_init(void);
> > #else
> > diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> > index e39ec7b..37dd23c 100644
> > --- a/drivers/acpi/scan.c
> > +++ b/drivers/acpi/scan.c
> > @@ -2035,6 +2035,7 @@ int __init acpi_scan_init(void)
> > acpi_int340x_thermal_init();
> > acpi_amba_init();
> > acpi_watchdog_init();
> > + acpi_indirectio_scan_init();
> >
> > acpi_scan_add_handler(&generic_device_handler);
> >
> > diff --git a/include/acpi/acpi_indirect_pio.h
> b/include/acpi/acpi_indirect_pio.h
> > new file mode 100644
> > index 0000000..efc5c43
> > --- /dev/null
> > +++ b/include/acpi/acpi_indirect_pio.h
> > @@ -0,0 +1,24 @@
> > +/*
> > + * ACPI support for indirect-PIO bus.
> > + *
> > + * Copyright (C) 2017 Hisilicon Limited, All Rights Reserved.
> > + * Author: Gabriele Paoloni <gabriele.paoloni at huawei.com>
> > + * Author: Zhichang Yuan <yuanzhichang at hisilicon.com>
> > + *
> > + * This program is free software; you can redistribute it and/or
> modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#ifndef _ACPI_INDIRECT_PIO_H
> > +#define _ACPI_INDIRECT_PIO_H
> > +
> > +struct indirect_pio_device_desc {
> > + void *pdata; /* device relevant info data */
> > + int (*pre_setup)(struct acpi_device *adev, void *pdata);
> > +};
> > +
> > +int acpi_set_logic_pio_resource(struct device *child,
> > + struct device *hostdev);
> > +
> > +#endif
> > --
> > 2.7.4
> >
> >
More information about the linux-arm-kernel
mailing list