[PATCH] arm64: dts: ls208xa: disable SD UHS-I modes by default on RDB
Y.B. Lu
yangbo.lu at nxp.com
Wed May 31 03:16:03 PDT 2017
> -----Original Message-----
> From: Yinbo Zhu
> Sent: Wednesday, May 31, 2017 6:12 PM
> To: Y.B. Lu
> Subject: FW: [PATCH] arm64: dts: ls208xa: disable SD UHS-I modes by
> default on RDB
>
>
>
> -----Original Message-----
> From: yinbo.zhu [mailto:yinbo.zhu at nxp.com]
> Sent: 2017年5月31日 PM 5:33
> To: linux-arm-kernel at lists.infradead.org
> Cc: Yinbo Zhu <yinbo.zhu at nxp.com>
> Subject: [PATCH] arm64: dts: ls208xa: disable SD UHS-I modes by default
> on RDB
>
> Currently SD UHS-I modes were enabled by default on LS208xARDB boards,
> but the new LS2088ARDB RevF board didn't support them any more since SDHC
> circuit had been reworked. This patch is to disable SD UHS-I modes by
> default in case of any issue on LS2088ARDB RevF
>
> Signed-off-by: yinbo.zhu <yinbo.zhu at nxp.com>
[Lu Yangbo-B47093] It looks good to me.
Acked-by: Yangbo Lu <yangbo.lu at nxp.com>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 4 ----
> 1 file changed, 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
> index 3a944bb..f06b7f5 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
> @@ -45,10 +45,6 @@
> */
>
> &esdhc {
> - sd-uhs-sdr104;
> - sd-uhs-sdr50;
> - sd-uhs-sdr25;
> - sd-uhs-sdr12;
> status = "okay";
> };
>
> --
> 2.1.0.27.g96db324
More information about the linux-arm-kernel
mailing list