[PATCH 31/58] ARM: dts: at91: sama5d3: TC blocks are also simple-mfd and syscon devices

[Alexandre Belloni]

Add simple-mfd and syscon to the TC blocks to allow to register one of the
channels as clocksource properly at boot time. It also allows to use
regmap instead of tclib.

Signed-off-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
---
 arch/arm/boot/dts/sama5d3.dtsi      | 4 +++-
 arch/arm/boot/dts/sama5d3_tcb1.dtsi | 4 +++-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index b06448ba6649..d026470c10e7 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -142,7 +142,9 @@
 			};
 
 			tcb0: timer at f0010000 {
-				compatible = "atmel,at91sam9x5-tcb";
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xf0010000 0x100>;
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&tcb0_clk>, <&clk32k>;
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
index 801f9745e82f..cb30bdb1a9ca 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -28,7 +28,9 @@
 			};
 
 			tcb1: timer at f8014000 {
-				compatible = "atmel,at91sam9x5-tcb";
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xf8014000 0x100>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&tcb1_clk>, <&clk32k>;
-- 
2.11.0