[PATCH] ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes
Fabio Estevam
festevam at gmail.com
Tue May 30 13:40:06 PDT 2017
Hi Christopher,
On Tue, May 30, 2017 at 5:16 PM, <christopher.spinrath at rwth-aachen.de> wrote:
> + awnh387_pwrseq: pwrseq {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwrseq>;
> + compatible = "mmc-pwrseq-sd8787";
> + powerdown-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
At least in the AW-NH387 datasheet I found it says:
RESETn: Reset(active low at least 10ns)
Please double check the polarity in device tree.
More information about the linux-arm-kernel
mailing list