[PATCH 4/6] irqchip: irq-mvebu-icu: new driver for Marvell ICU

Thomas Petazzoni thomas.petazzoni at free-electrons.com
Tue May 30 02:16:09 PDT 2017


The Marvell ICU unit is found in the CP110 block of the Marvell Armada
7K and 8K SoCs. It collects the wired interrupts of the devices located
in the CP110 and turns them into SPI interrupts in the GIC located in
the AP806 side of the SoC, by using a memory transaction.

Until now, the ICU was configured in a static fashion by the firmware,
and Linux was relying on this static configuration. By having Linux
configure the ICU, we are more flexible, and we can allocate dynamically
the GIC SPI interrupts only for devices that are actually in use.

The driver was initially written by Hanna Hawa <hannah at marvell.com>.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
 drivers/irqchip/Kconfig                            |   3 +
 drivers/irqchip/Makefile                           |   1 +
 drivers/irqchip/irq-mvebu-icu.c                    | 373 +++++++++++++++++++++
 .../dt-bindings/interrupt-controller/mvebu-icu.h   |  15 +
 4 files changed, 392 insertions(+)
 create mode 100644 drivers/irqchip/irq-mvebu-icu.c
 create mode 100644 include/dt-bindings/interrupt-controller/mvebu-icu.h

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index e527ee5..676232a 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -271,6 +271,9 @@ config IRQ_MXS
 config MVEBU_GICP
 	bool
 
+config MVEBU_ICU
+	bool
+
 config MVEBU_ODMI
 	bool
 	select GENERIC_MSI_IRQ_DOMAIN
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 11eb858..18fa5fa 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_INGENIC_IRQ)		+= irq-ingenic.o
 obj-$(CONFIG_IMX_GPCV2)			+= irq-imx-gpcv2.o
 obj-$(CONFIG_PIC32_EVIC)		+= irq-pic32-evic.o
 obj-$(CONFIG_MVEBU_GICP)		+= irq-mvebu-gicp.o
+obj-$(CONFIG_MVEBU_ICU)			+= irq-mvebu-icu.o
 obj-$(CONFIG_MVEBU_ODMI)		+= irq-mvebu-odmi.o
 obj-$(CONFIG_MVEBU_PIC)			+= irq-mvebu-pic.o
 obj-$(CONFIG_LS_SCFG_MSI)		+= irq-ls-scfg-msi.o
diff --git a/drivers/irqchip/irq-mvebu-icu.c b/drivers/irqchip/irq-mvebu-icu.c
new file mode 100644
index 0000000..8a5c217
--- /dev/null
+++ b/drivers/irqchip/irq-mvebu-icu.c
@@ -0,0 +1,373 @@
+/*
+ * Copyright (C) 2017 Marvell
+ *
+ * Hanna Hawa <hannah at marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/mvebu-icu.h>
+
+/* ICU registers */
+#define ICU_SETSPI_NSR_AL	0x10
+#define ICU_SETSPI_NSR_AH	0x14
+#define ICU_CLRSPI_NSR_AL	0x18
+#define ICU_CLRSPI_NSR_AH	0x1c
+#define ICU_INT_CFG(x)          (0x100 + 4 * x)
+#define   ICU_INT_ENABLE	BIT(24)
+#define   ICU_IS_EDGE		BIT(28)
+#define   ICU_GROUP_SHIFT	29
+
+/* GICP registers */
+#define GICP_SETSPI_NSR_OFFSET	0x0
+#define GICP_CLRSPI_NSR_OFFSET	0x8
+
+/* ICU definitions */
+#define ICU_MAX_IRQS		207
+#define IRQS_PER_ICU		64
+#define ICU_MAX_SPI_IRQ_IN_GIC	(2 * IRQS_PER_ICU)
+#define ICU_GIC_SPI_BASE0	64
+#define ICU_GIC_SPI_BASE1	288
+
+#define ICU_SATA0_IRQ_INT	109
+#define ICU_SATA1_IRQ_INT	107
+
+struct mvebu_icu {
+	struct irq_chip irq_chip;
+	void __iomem *base;
+	struct irq_domain *domain;
+	struct device *dev;
+};
+
+static DEFINE_SPINLOCK(icu_lock);
+static DECLARE_BITMAP(icu_irq_alloc, ICU_MAX_SPI_IRQ_IN_GIC);
+
+static unsigned int
+mvebu_icu_icuidx_to_gicspi(unsigned int icuidx)
+{
+	if (icuidx < ICU_GIC_SPI_BASE0)
+		return ICU_GIC_SPI_BASE0 + icuidx;
+	else
+		return ICU_GIC_SPI_BASE1 + (icuidx - IRQS_PER_ICU);
+}
+
+static unsigned int
+mvebu_icu_gicspi_to_icuidx(unsigned int gicspi)
+{
+	if (gicspi < ICU_GIC_SPI_BASE1)
+		return gicspi - ICU_GIC_SPI_BASE0;
+	else
+		return gicspi - ICU_GIC_SPI_BASE1 + IRQS_PER_ICU;
+}
+
+static int
+mvebu_icu_irq_parent_domain_alloc(struct irq_domain *domain,
+				  unsigned int virq, unsigned int type,
+				  int *irq_msg_num)
+{
+	struct mvebu_icu *icu = domain->host_data;
+	struct irq_fwspec fwspec;
+	int ret;
+
+	/* Find first free interrupt in ICU pool */
+	spin_lock(&icu_lock);
+	*irq_msg_num = find_first_zero_bit(icu_irq_alloc,
+					   ICU_MAX_SPI_IRQ_IN_GIC);
+	if (*irq_msg_num == ICU_MAX_SPI_IRQ_IN_GIC) {
+		dev_err(icu->dev, "No free ICU interrupt found\n");
+		spin_unlock(&icu_lock);
+		return -ENOSPC;
+	}
+	set_bit(*irq_msg_num, icu_irq_alloc);
+	spin_unlock(&icu_lock);
+
+	fwspec.fwnode = domain->parent->fwnode;
+	fwspec.param_count = 3;
+	fwspec.param[0] = GIC_SPI;
+	fwspec.param[1] = mvebu_icu_icuidx_to_gicspi(*irq_msg_num) - 32;
+	fwspec.param[2] = type;
+
+	/* Allocate the IRQ in the parent */
+	ret = irq_domain_alloc_irqs_parent(domain, virq, 1, &fwspec);
+	if (ret) {
+		spin_lock(&icu_lock);
+		clear_bit(*irq_msg_num, icu_irq_alloc);
+		spin_unlock(&icu_lock);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void
+mvebu_icu_irq_parent_domain_free(struct irq_domain *domain,
+				 unsigned int virq,
+				 int irq_msg_num)
+{
+	irq_domain_free_irqs_parent(domain, virq, 1);
+
+	spin_lock(&icu_lock);
+	clear_bit(irq_msg_num, icu_irq_alloc);
+	spin_unlock(&icu_lock);
+}
+
+static int
+mvebu_icu_irq_domain_translate(struct irq_domain *d, struct irq_fwspec *fwspec,
+			       unsigned long *hwirq, unsigned int *type)
+{
+	struct mvebu_icu *icu = d->host_data;
+	unsigned int icu_group;
+
+	/* Check the count of the parameters in dt */
+	if (WARN_ON(fwspec->param_count < 3)) {
+		dev_err(icu->dev, "wrong ICU parameter count %d\n",
+			fwspec->param_count);
+		return -EINVAL;
+	}
+
+	/* Only ICU group type is handled */
+	icu_group = fwspec->param[0];
+	if (icu_group != ICU_GRP_NSR && icu_group != ICU_GRP_SR &&
+	    icu_group != ICU_GRP_SEI && icu_group != ICU_GRP_REI) {
+		dev_err(icu->dev, "wrong ICU type %x\n", icu_group);
+		return -EINVAL;
+	}
+
+	*hwirq = fwspec->param[1];
+	if (*hwirq < 0) {
+		dev_err(icu->dev, "invalid interrupt number %ld\n", *hwirq);
+		return -EINVAL;
+	}
+
+	/* Mask the type to prevent wrong DT configuration */
+	*type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK;
+
+	return 0;
+}
+
+static int
+mvebu_icu_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
+			   unsigned int nr_irqs, void *args)
+{
+	int err = 0, irq_msg_num = 0;
+	unsigned long hwirq;
+	unsigned int type = 0;
+	unsigned int icu_group, icu_int;
+	struct irq_fwspec *fwspec = args;
+	struct mvebu_icu *icu = domain->host_data;
+
+	err = mvebu_icu_irq_domain_translate(domain, fwspec, &hwirq, &type);
+	if (err) {
+		dev_err(icu->dev, "failed to translate ICU parameters\n");
+		return err;
+	}
+
+	icu_group = fwspec->param[0];
+
+	err = mvebu_icu_irq_parent_domain_alloc(domain, virq, type,
+						&irq_msg_num);
+	if (err) {
+		dev_err(icu->dev, "failed to allocate ICU interrupt in parent domain\n");
+		return err;
+	}
+
+	/* Configure the ICU with irq number & type */
+	icu_int = irq_msg_num | ICU_INT_ENABLE;
+	if (type & IRQ_TYPE_EDGE_RISING)
+		icu_int |= ICU_IS_EDGE;
+	icu_int |= icu_group << ICU_GROUP_SHIFT;
+	writel(icu_int, icu->base + ICU_INT_CFG(hwirq));
+
+	/*
+	 * The SATA unit has 2 ports, and a dedicated ICU entry per
+	 * port. The ahci sata driver supports only one irq interrupt
+	 * per SATA unit. To solve this conflict, we configure the 2
+	 * SATA wired interrupts in the south bridge into 1 GIC
+	 * interrupt in the north bridge. Even if only a single port
+	 * is enabled, if sata node is enabled, both interrupts are
+	 * configured (regardless of which port is actually in use).
+	 * The ICU index of SATA0 = 107, SATA1 = 109
+	 */
+	if (hwirq == ICU_SATA0_IRQ_INT || hwirq == ICU_SATA1_IRQ_INT) {
+		writel(icu_int, icu->base + ICU_INT_CFG(ICU_SATA0_IRQ_INT));
+		writel(icu_int, icu->base + ICU_INT_CFG(ICU_SATA1_IRQ_INT));
+	}
+
+	err = irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
+					    &icu->irq_chip, icu);
+	if (err) {
+		dev_err(icu->dev, "failed to set the data to IRQ domain\n");
+		mvebu_icu_irq_parent_domain_free(domain, virq, irq_msg_num);
+		return err;
+	}
+
+	return 0;
+}
+
+static void
+mvebu_icu_irq_domain_free(struct irq_domain *domain, unsigned int virq,
+			  unsigned int nr_irqs)
+{
+	struct mvebu_icu *icu = domain->host_data;
+	struct irq_data *irq = irq_get_irq_data(virq);
+	struct irq_data *irq_parent = irq->parent_data;
+	int irq_msg_num = mvebu_icu_gicspi_to_icuidx(irqd_to_hwirq(irq_parent));
+
+	WARN_ON(nr_irqs != 1);
+
+	writel(0, icu->base + ICU_INT_CFG(irqd_to_hwirq(irq)));
+
+	mvebu_icu_irq_parent_domain_free(domain, virq, irq_msg_num);
+}
+
+static const struct irq_domain_ops mvebu_icu_domain_ops = {
+	.translate = mvebu_icu_irq_domain_translate,
+	.alloc     = mvebu_icu_irq_domain_alloc,
+	.free      = mvebu_icu_irq_domain_free,
+};
+
+static int mvebu_icu_probe(struct platform_device *pdev)
+{
+	struct mvebu_icu *icu;
+	struct irq_domain *parent_domain;
+	struct device_node *node = pdev->dev.of_node;
+	struct platform_device *gicp_pdev;
+	struct device_node *parent_irq_dn;
+	struct device_node *gicp_dn;
+	struct resource *res;
+	struct resource *gicp_res;
+	u32 i, icu_int;
+	int ret;
+
+	icu = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_icu),
+			   GFP_KERNEL);
+	if (!icu)
+		return -ENOMEM;
+
+	icu->dev = &pdev->dev;
+
+	icu->irq_chip.name = kstrdup(dev_name(&pdev->dev), GFP_KERNEL);
+	icu->irq_chip.irq_mask = irq_chip_mask_parent;
+	icu->irq_chip.irq_unmask = irq_chip_unmask_parent;
+	icu->irq_chip.irq_eoi = irq_chip_eoi_parent;
+	icu->irq_chip.irq_set_type = irq_chip_set_type_parent;
+#ifdef CONFIG_SMP
+	icu->irq_chip.irq_set_affinity = irq_chip_set_affinity_parent;
+#endif
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	icu->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(icu->base)) {
+		dev_err(&pdev->dev, "Failed to map icu base address.\n");
+		return PTR_ERR(icu->base);
+	}
+
+	gicp_dn = of_parse_phandle(node, "gicp", 0);
+	if (!gicp_dn) {
+		dev_err(&pdev->dev, "Missing gicp property.\n");
+		return -ENODEV;
+	}
+
+	gicp_pdev = of_find_device_by_node(gicp_dn);
+	if (!gicp_pdev) {
+		dev_err(&pdev->dev, "Cannot find gicp device.\n");
+		return -ENODEV;
+	}
+
+	get_device(&gicp_pdev->dev);
+
+	/*
+	 * We really want the GICP to have cleared all interrupts
+	 * potentially left pending by the firmware before probing the
+	 * ICUs.
+	 */
+	if (!device_is_bound(&gicp_pdev->dev)) {
+		ret = -EPROBE_DEFER;
+		goto fail;
+	}
+
+	gicp_res = platform_get_resource(gicp_pdev, IORESOURCE_MEM, 0);
+	if (!gicp_res) {
+		dev_err(&pdev->dev, "Failed to get gicp resource\n");
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	parent_irq_dn = of_irq_find_parent(node);
+	if (!parent_irq_dn) {
+		dev_err(&pdev->dev, "failed to find parent IRQ node\n");
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	parent_domain = irq_find_host(parent_irq_dn);
+	if (!parent_domain) {
+		dev_err(&pdev->dev, "Unable to locate ICU parent domain\n");
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	/* Set Clear/Set ICU SPI message address in AP */
+	writel(upper_32_bits(gicp_res->start + GICP_SETSPI_NSR_OFFSET),
+	       icu->base + ICU_SETSPI_NSR_AH);
+	writel(lower_32_bits(gicp_res->start + GICP_SETSPI_NSR_OFFSET),
+	       icu->base + ICU_SETSPI_NSR_AL);
+	writel(upper_32_bits(gicp_res->start + GICP_CLRSPI_NSR_OFFSET),
+	       icu->base + ICU_CLRSPI_NSR_AH);
+	writel(lower_32_bits(gicp_res->start + GICP_CLRSPI_NSR_OFFSET),
+	       icu->base + ICU_CLRSPI_NSR_AL);
+
+	/*
+	 * Clean all ICU interrupts with type SPI_NSR, required to
+	 * avoid unpredictable SPI assignments done by firmware.
+	 */
+	for (i = 0 ; i < ICU_MAX_IRQS ; i++) {
+		icu_int = readl(icu->base + ICU_INT_CFG(i));
+		if ((icu_int >> ICU_GROUP_SHIFT) == ICU_GRP_NSR)
+			writel(0x0, icu->base + ICU_INT_CFG(i));
+	}
+
+	icu->domain = irq_domain_add_hierarchy(parent_domain, 0,
+					       ICU_MAX_SPI_IRQ_IN_GIC, node,
+					       &mvebu_icu_domain_ops, icu);
+	if (!icu->domain) {
+		dev_err(&pdev->dev, "Failed to create ICU domain\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	return 0;
+fail:
+	put_device(&gicp_pdev->dev);
+	return ret;
+}
+
+static const struct of_device_id mvebu_icu_of_match[] = {
+	{ .compatible = "marvell,icu", },
+	{},
+};
+
+static struct platform_driver mvebu_icu_driver = {
+	.probe  = mvebu_icu_probe,
+	.driver = {
+		.name = "mvebu-icu",
+		.of_match_table = mvebu_icu_of_match,
+	},
+};
+builtin_platform_driver(mvebu_icu_driver);
diff --git a/include/dt-bindings/interrupt-controller/mvebu-icu.h b/include/dt-bindings/interrupt-controller/mvebu-icu.h
new file mode 100644
index 0000000..8249558
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/mvebu-icu.h
@@ -0,0 +1,15 @@
+/*
+ * This header provides constants for the MVEBU ICU driver.
+ */
+
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_MVEBU_ICU_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_MVEBU_ICU_H
+
+/* interrupt specifier cell 0 */
+
+#define ICU_GRP_NSR		0x0
+#define ICU_GRP_SR		0x1
+#define ICU_GRP_SEI		0x4
+#define ICU_GRP_REI		0x5
+
+#endif
-- 
2.7.4




More information about the linux-arm-kernel mailing list