[PATCH 10/11] crypto: sun4i-ss: fix large block size support

[Antoine Tenart]

Hi Maxime,

On Mon, May 29, 2017 at 10:29:31AM +0200, Maxime Ripard wrote:
> On Mon, May 29, 2017 at 10:09:44AM +0200, Antoine Tenart wrote:
> > > Which speed are the SS clocks ?
> > 
> > The AHB SS clk is running at 300 MHz and the SS clk at 150 MHz. SS clk
> > is at the expected rate but the AHB SS clk has a higher rate that what's
> > expected.
> > 
> > In the probing function only the SS clk rate is explicitly set. I tried
> > to set the AHB clk rate as well and removed the delays. This didn't fix
> > the framework selftests at boot time. Is there any reason the AHB SS clk
> > rate isn't explicitly set when probing the driver? (Should it?)
> 
> It probably shouldn't.
> 
> The AHB clock is shared by most of the drivers, some of them actually
> using that clock to generate their signals.
> 
> You would have to unbreak all those drivers first, which is probably
> not needed at all. I haven't seen a case where a block had a module
> clock and did care for its AHB clock rate.

OK, makes sense.

I'll wait for Corentin to test the series, and I'll send a v2 only
fixing the typos then.

Thanks!
Antoine

-- 
Antoine Ténart, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170529/2b8c7fd5/attachment.sig>