[PATCH 2/3] clk: sunxi-ng: a83t: Add support for A83T's PRCM
Chen-Yu Tsai
wens at csie.org
Fri May 26 01:00:24 PDT 2017
The A83T's PRCM has the same set of clocks and resets as the A64.
However, a few dividers are different. And due to the lack of a low
speed 32.768 kHz oscillator, a few of the clock parents are different.
Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
drivers/clk/sunxi-ng/ccu-sun8i-r.c | 107 +++++++++++++++++++++++++++++++++++++
1 file changed, 107 insertions(+)
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-r.c b/drivers/clk/sunxi-ng/ccu-sun8i-r.c
index de02be75785c..e54816ec1dbe 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-r.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-r.c
@@ -27,6 +27,8 @@
static const char * const ar100_parents[] = { "osc32k", "osc24M",
"pll-periph0", "iosc" };
+static const char * const a83t_ar100_parents[] = { "osc16M-d512", "osc24M",
+ "pll-periph0", "iosc" };
static const struct ccu_mux_var_prediv ar100_predivs[] = {
{ .index = 2, .shift = 8, .width = 5 },
};
@@ -52,6 +54,27 @@ static struct ccu_div ar100_clk = {
},
};
+static struct ccu_div a83t_ar100_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+ .mux = {
+ .shift = 16,
+ .width = 2,
+
+ .var_predivs = ar100_predivs,
+ .n_var_predivs = ARRAY_SIZE(ar100_predivs),
+ },
+
+ .common = {
+ .reg = 0x00,
+ .features = CCU_FEATURE_VARIABLE_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("ar100",
+ a83t_ar100_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
static CLK_FIXED_FACTOR(ahb0_clk, "ahb0", "ar100", 1, 1, 0);
static struct ccu_div apb0_clk = {
@@ -66,6 +89,8 @@ static struct ccu_div apb0_clk = {
},
};
+static SUNXI_CCU_M(a83t_apb0_clk, "apb0", "ahb0", 0x0c, 0, 2, 0);
+
static SUNXI_CCU_GATE(apb0_pio_clk, "apb0-pio", "apb0",
0x28, BIT(0), 0);
static SUNXI_CCU_GATE(apb0_ir_clk, "apb0-ir", "apb0",
@@ -90,6 +115,46 @@ static SUNXI_CCU_MP_WITH_MUX_GATE(ir_clk, "ir",
BIT(31), /* gate */
0);
+static const char *const a83t_r_mod0_parents[] = { "osc16M", "osc24M" };
+static const struct ccu_mux_fixed_prediv a83t_ir_predivs[] = {
+ { .index = 0, .div = 16 },
+};
+static struct ccu_mp a83t_ir_clk = {
+ .enable = BIT(31),
+
+ .m = _SUNXI_CCU_DIV(0, 4),
+ .p = _SUNXI_CCU_DIV(16, 2),
+
+ .mux = {
+ .shift = 24,
+ .width = 2,
+ .fixed_predivs = a83t_ir_predivs,
+ .n_predivs = ARRAY_SIZE(a83t_ir_predivs),
+ },
+
+ .common = {
+ .reg = 0x54,
+ .features = CCU_FEATURE_VARIABLE_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("ir",
+ a83t_r_mod0_parents,
+ &ccu_mp_ops,
+ 0),
+ },
+};
+
+static struct ccu_common *sun8i_a83t_r_ccu_clks[] = {
+ &a83t_ar100_clk.common,
+ &a83t_apb0_clk.common,
+ &apb0_pio_clk.common,
+ &apb0_ir_clk.common,
+ &apb0_timer_clk.common,
+ &apb0_rsb_clk.common,
+ &apb0_uart_clk.common,
+ &apb0_i2c_clk.common,
+ &apb0_twd_clk.common,
+ &a83t_ir_clk.common,
+};
+
static struct ccu_common *sun8i_h3_r_ccu_clks[] = {
&ar100_clk.common,
&apb0_clk.common,
@@ -115,6 +180,23 @@ static struct ccu_common *sun50i_a64_r_ccu_clks[] = {
&ir_clk.common,
};
+static struct clk_hw_onecell_data sun8i_a83t_r_hw_clks = {
+ .hws = {
+ [CLK_AR100] = &a83t_ar100_clk.common.hw,
+ [CLK_AHB0] = &ahb0_clk.hw,
+ [CLK_APB0] = &a83t_apb0_clk.common.hw,
+ [CLK_APB0_PIO] = &apb0_pio_clk.common.hw,
+ [CLK_APB0_IR] = &apb0_ir_clk.common.hw,
+ [CLK_APB0_TIMER] = &apb0_timer_clk.common.hw,
+ [CLK_APB0_RSB] = &apb0_rsb_clk.common.hw,
+ [CLK_APB0_UART] = &apb0_uart_clk.common.hw,
+ [CLK_APB0_I2C] = &apb0_i2c_clk.common.hw,
+ [CLK_APB0_TWD] = &apb0_twd_clk.common.hw,
+ [CLK_IR] = &a83t_ir_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
static struct clk_hw_onecell_data sun8i_h3_r_hw_clks = {
.hws = {
[CLK_AR100] = &ar100_clk.common.hw,
@@ -148,6 +230,14 @@ static struct clk_hw_onecell_data sun50i_a64_r_hw_clks = {
.num = CLK_NUMBER,
};
+static struct ccu_reset_map sun8i_a83t_r_ccu_resets[] = {
+ [RST_APB0_IR] = { 0xb0, BIT(1) },
+ [RST_APB0_TIMER] = { 0xb0, BIT(2) },
+ [RST_APB0_RSB] = { 0xb0, BIT(3) },
+ [RST_APB0_UART] = { 0xb0, BIT(4) },
+ [RST_APB0_I2C] = { 0xb0, BIT(6) },
+};
+
static struct ccu_reset_map sun8i_h3_r_ccu_resets[] = {
[RST_APB0_IR] = { 0xb0, BIT(1) },
[RST_APB0_TIMER] = { 0xb0, BIT(2) },
@@ -163,6 +253,16 @@ static struct ccu_reset_map sun50i_a64_r_ccu_resets[] = {
[RST_APB0_I2C] = { 0xb0, BIT(6) },
};
+static const struct sunxi_ccu_desc sun8i_a83t_r_ccu_desc = {
+ .ccu_clks = sun8i_a83t_r_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun8i_a83t_r_ccu_clks),
+
+ .hw_clks = &sun8i_a83t_r_hw_clks,
+
+ .resets = sun8i_a83t_r_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun8i_a83t_r_ccu_resets),
+};
+
static const struct sunxi_ccu_desc sun8i_h3_r_ccu_desc = {
.ccu_clks = sun8i_h3_r_ccu_clks,
.num_ccu_clks = ARRAY_SIZE(sun8i_h3_r_ccu_clks),
@@ -198,6 +298,13 @@ static void __init sunxi_r_ccu_init(struct device_node *node,
sunxi_ccu_probe(node, reg, desc);
}
+static void __init sun8i_a83t_r_ccu_setup(struct device_node *node)
+{
+ sunxi_r_ccu_init(node, &sun8i_a83t_r_ccu_desc);
+}
+CLK_OF_DECLARE(sun8i_a83t_r_ccu, "allwinner,sun8i-a83t-r-ccu",
+ sun8i_a83t_r_ccu_setup);
+
static void __init sun8i_h3_r_ccu_setup(struct device_node *node)
{
sunxi_r_ccu_init(node, &sun8i_h3_r_ccu_desc);
--
2.11.0
More information about the linux-arm-kernel
mailing list