[PATCH v2 00/12] arm64: dts: hi3660: add device nodes

[Guodong Xu]

This patchset adds various devices nodes for hi3660 and hikey960.

HiKey960 is one of 96boards. For details information about it, please
refer to [1].

[1] https://github.com/96boards/documentation/tree/master/ConsumerEdition/HiKey960

in v2, incorporated review comments from Rob Herring <robh at kernel.org>
* uart4: max-speed should be in slave device bluetooth node
* LEDs:	- bt_active triggered by 'hci0-power'
	- move out of SoC level
* pinctrl: update dts to use #pinctrl-cells
* uart: add pinctrl information into uart nodes; add label strings.
* chosen: update stdout-path. serial6 is used.
* i2c: add label strings. change reg address to lower case.
* remove unnecessary status="ok"
* gpio-keys: move out of SoC level.

Chen Feng (2):
  arm64: dts: hi3660: Add uarts nodes
  arm64: dts: hi3660: Add pl031 rtc node

Chen Jun (1):
  arm64: dts: hi3660: add power key dts node

Guodong Xu (4):
  dt-bindings: arm: hisilicon: add bindings for HiKey960 board
  arm64: dts: hisilicon: update compatible string for hikey960
  arm64: dts: hikey960: add WL1837 Bluetooth device node
  arm64: dts: hikey960: add LED nodes

Wang Xiaoyin (3):
  arm64: dts: hikey960: pinctrl: add more pinmux and pinconfig
  arm64: dts: hi3660: add gpio dtsi file for Hisilicon Hi3660 SOC
  arm64: dts: hi3660: add spi device nodes

Zhangfei Gao (2):
  arm64: dts: hi3660: add resources for clock and reset
  arm64: dts: Add I2C nodes for Hi3660

 .../bindings/arm/hisilicon/hisilicon.txt           |   4 +
 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts  | 130 +++-
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi          | 601 +++++++++++++++-
 .../arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi | 778 +++++++++++++++++++--
 4 files changed, 1439 insertions(+), 74 deletions(-)

-- 
2.10.2