[PATCH 2/2] ARM: dts: add core I2C devices to the APQ8060 Dragonboard

[Bjorn Andersson]

On Mon 15 May 00:50 PDT 2017, Linus Walleij wrote:

> The APQ8060 Dragonboard has an Atmel AT24c128 EEPROM and a
> Wolfson Micro WM8903 codec connected to its GSBI8 I2C bus.
> Add entries for these to the device tree. The interrupt line
> from the WM8903 chip is not routed anywhere on this design
> so it can not be used.
> 

Acked-by: Bjorn Andersson <bjorn.andersson at linaro.org>

Regards,
Bjorn