[PATCH v3] ARM: dts: mvebu: add support for Linksys WRT3200ACM (Rango)

[Andrew Lunn]

On Wed, May 24, 2017 at 08:16:46AM +0200, Ralph Sennhauser wrote:
> The Linksys WRT3200ACM (Rango) is the lates Armada-385 based router in
> the Linksys WRT AC Series which got released in October 2016.
> 
> Key differences to the earlier Armada-385 based devices in the series is
> a bigger flash chip, next generation wireless modules (Marvell 88W8964)
> in the mini pcie slots as well as a Marvell SD8887. Finally the CPU is
> clocked at 1866 GHz by default.
> 
> The file armada-385-linksys-rango.dts is loosly based off of a DTS
> authored by Imre Kaloz.
> 
> As Rango is part of the armada-385-linksys family of boards use the
> armada-385-linksys.dtsi as basis. As for functional differences to Imre
> Kaloz dts, the wlan LEDs aren't connected to the expander chip pca9635
> but directly to GPIOs. Then mpp47 controls the USB2.0 port and not the
> USB3.0 port, so use the correct GPIO mpp44 for it. Finally use
> non-removable instead of broken-cd with the sdhci node to avoid polling.
> 
> Other changes can be categorized as just cleanup / reorganization due to
> using the armada-385-linksys.dtsi.
> 
> URL: https://github.com/openwrt/openwrt/blob/0abc3fa5a996daf7dafdc7794ccfe3fa7e955c5a/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts
> Signed-off-by: Ralph Sennhauser <ralph.sennhauser at gmail.com>
> Signed-off-by: Imre Kaloz <kaloz at openwrt.org>

Reviewed-by: Andrew Lunn <andrew at lunn.ch>

    Andrew