[PATCH 2/3] ARM64: dts: Fix GXL periphs pinctrl pull-enable register base

[Jerome Brunet]

On Tue, 2017-05-23 at 16:21 +0200, Neil Armstrong wrote:
> The pull-enable register base was wrongly copied from the GXBB pinctrl node,
> but was not used yet.

Reviewed-by: Jerome Brunet <jbrunet at baylibre.com>

> 
> Fixes: fb0fe92294a9 ("ARM64: dts: meson-gxl: Add pinctrl nodes")
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> index 4871ce5..57fe1f5 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> @@ -239,7 +239,7 @@
>  		gpio: bank at 4b0 {
>  			reg = <0x0 0x004b0 0x0 0x28>,
>  			      <0x0 0x004e8 0x0 0x14>,
> -			      <0x0 0x00120 0x0 0x14>,
> +			      <0x0 0x00520 0x0 0x14>,
>  			      <0x0 0x00430 0x0 0x40>;
>  			reg-names = "mux", "pull", "pull-enable", "gpio";
>  			gpio-controller;