[PATCH v3 1/4] dt-bindings: clock: gxbb: expose UART clocks
Neil Armstrong
narmstrong at baylibre.com
Tue May 23 02:17:22 PDT 2017
Hi Helmut,
On 03/31/2017 06:54 PM, Helmut Klein wrote:
> Expose the clock ids of the three none AO uarts to the dt-bindings
>
> Signed-off-by: Helmut Klein <hgkr.klein at gmail.com>
> ---
> drivers/clk/meson/gxbb.h | 6 +++---
> include/dt-bindings/clock/gxbb-clkc.h | 3 +++
> 2 files changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h
> index 8ee2022ce5d5..1edfaa5fe307 100644
> --- a/drivers/clk/meson/gxbb.h
> +++ b/drivers/clk/meson/gxbb.h
> @@ -194,7 +194,7 @@
> /* #define CLKID_SAR_ADC */
> #define CLKID_SMART_CARD 24
> #define CLKID_RNG0 25
> -#define CLKID_UART0 26
> +/* CLKID_UART0 */
> #define CLKID_SDHC 27
> #define CLKID_STREAM 28
> #define CLKID_ASYNC_FIFO 29
> @@ -216,7 +216,7 @@
> #define CLKID_ADC 45
> #define CLKID_BLKMV 46
> #define CLKID_AIU 47
> -#define CLKID_UART1 48
> +/* CLKID_UART1 */
> #define CLKID_G2D 49
> /* CLKID_USB0 */
> /* CLKID_USB1 */
> @@ -236,7 +236,7 @@
> /* CLKID_USB0_DDR_BRIDGE */
> #define CLKID_MMC_PCLK 66
> #define CLKID_DVIN 67
> -#define CLKID_UART2 68
> +/* CLKID_UART2 */
> /* #define CLKID_SANA */
> #define CLKID_VPU_INTR 70
> #define CLKID_SEC_AHB_AHB3_BRIDGE 71
> diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h
> index 692846c7941b..7b329df47752 100644
> --- a/include/dt-bindings/clock/gxbb-clkc.h
> +++ b/include/dt-bindings/clock/gxbb-clkc.h
> @@ -15,13 +15,16 @@
> #define CLKID_SPI 34
> #define CLKID_I2C 22
> #define CLKID_SAR_ADC 23
> +#define CLKID_UART0 26
> #define CLKID_ETH 36
> +#define CLKID_UART1 48
> #define CLKID_USB0 50
> #define CLKID_USB1 51
> #define CLKID_USB 55
> #define CLKID_HDMI_PCLK 63
> #define CLKID_USB1_DDR_BRIDGE 64
> #define CLKID_USB0_DDR_BRIDGE 65
> +#define CLKID_UART2 68
> #define CLKID_SANA 69
> #define CLKID_GCLK_VENCI_INT0 77
> #define CLKID_AO_I2C 93
Acked-by: Neil Armstrong <narmstrong at baylibre.com>
I rebased on 4.12-rc1 and applied on next/headers.
Thanks,
Neil
More information about the linux-arm-kernel
mailing list