[PATCH v2] iio: adc: bcm_iproc_adc: swap primary and secondary isr handler's

[Jonathan Cameron]

On 16/05/17 07:52, Raveendra Padasalagi wrote:
> The third argument of devm_request_threaded_irq() is the primary
> handler. It is called in hardirq context and checks whether the
> interrupt is relevant to the device. If the primary handler returns
> IRQ_WAKE_THREAD, the secondary handler (a.k.a. handler thread) is
> scheduled to run in process context.
> 
> bcm_iproc_adc.c uses the secondary handler as the primary one
> and the other way around. So this patch fixes the same, along with
> re-naming the secondary handler and primary handler names properly.
> 
> Tested on the BCM9583XX iProc SoC based boards.
> 
> Fixes: 4324c97ecedc ("iio: Add driver for Broadcom iproc-static-adc")
> Reported-by: Pavel Roskin <plroskin at gmail.com>
> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi at broadcom.com>
> Cc: stable at vger.kernel.org
Applied to the fixes-togreg branch of iio.git.

Thanks,

Jonathan
> ---
> 
> Changes in v2:
>   - Added Cc tag in the Signed-off area to send the patch to stable kernel
>   - Fixes tag corrected with proper formatting
> 
>   drivers/iio/adc/bcm_iproc_adc.c | 8 ++++----
>   1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/iio/adc/bcm_iproc_adc.c b/drivers/iio/adc/bcm_iproc_adc.c
> index 21d38c8..7f4f9c4 100644
> --- a/drivers/iio/adc/bcm_iproc_adc.c
> +++ b/drivers/iio/adc/bcm_iproc_adc.c
> @@ -143,7 +143,7 @@ static void iproc_adc_reg_dump(struct iio_dev *indio_dev)
>   	iproc_adc_dbg_reg(dev, adc_priv, IPROC_SOFT_BYPASS_DATA);
>   }
>   
> -static irqreturn_t iproc_adc_interrupt_handler(int irq, void *data)
> +static irqreturn_t iproc_adc_interrupt_thread(int irq, void *data)
>   {
>   	u32 channel_intr_status;
>   	u32 intr_status;
> @@ -167,7 +167,7 @@ static irqreturn_t iproc_adc_interrupt_handler(int irq, void *data)
>   	return IRQ_NONE;
>   }
>   
> -static irqreturn_t iproc_adc_interrupt_thread(int irq, void *data)
> +static irqreturn_t iproc_adc_interrupt_handler(int irq, void *data)
>   {
>   	irqreturn_t retval = IRQ_NONE;
>   	struct iproc_adc_priv *adc_priv;
> @@ -181,7 +181,7 @@ static irqreturn_t iproc_adc_interrupt_thread(int irq, void *data)
>   	adc_priv = iio_priv(indio_dev);
>   
>   	regmap_read(adc_priv->regmap, IPROC_INTERRUPT_STATUS, &intr_status);
> -	dev_dbg(&indio_dev->dev, "iproc_adc_interrupt_thread(),INTRPT_STS:%x\n",
> +	dev_dbg(&indio_dev->dev, "iproc_adc_interrupt_handler(),INTRPT_STS:%x\n",
>   			intr_status);
>   
>   	intr_channels = (intr_status & IPROC_ADC_INTR_MASK) >> IPROC_ADC_INTR;
> @@ -566,8 +566,8 @@ static int iproc_adc_probe(struct platform_device *pdev)
>   	}
>   
>   	ret = devm_request_threaded_irq(&pdev->dev, adc_priv->irqno,
> -				iproc_adc_interrupt_thread,
>   				iproc_adc_interrupt_handler,
> +				iproc_adc_interrupt_thread,
>   				IRQF_SHARED, "iproc-adc", indio_dev);
>   	if (ret) {
>   		dev_err(&pdev->dev, "request_irq error %d\n", ret);
>