[PATCH 1/4] ata: Add DT bindings for Faraday Technology FTIDE010

[Linus Walleij]

This adds device tree bindings for the Faraday Technology
FTIDE010 found in the Storlink/Storm/Cortina Systems Gemini SoC.

I am not 100% sure that this part is from Faraday Technology but
a lot points in that direction:

- A later IDE interface called FTIDE020 exist and share some
  properties.

- The SATA bridge has the same Built In Self Test (BIST) that the
  Faraday FTSATA100 seems to have, and it has version number 0100
  in the device ID register, so this is very likely a FTSATA100
  bundled with the FTIDE010.

Cc: devicetree at vger.kernel.org
Cc: John Feng-Hsin Chiang <john453 at faraday-tech.com>
Cc: Greentime Hu <green.hu at gmail.com>
Acked-by: Hans Ulli Kroll <ulli.kroll at googlemail.com>
Acked-by: Rob Herring <robh at kernel.org>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
ChangeLog v1->v2:
- Cut the timings defintions from the device tree. Hard-code
  it in the driver instead, keeping the nice layout and
  configurability by making it easy to tweak the timings
  in the code.
- Fix up some confused references to 50 MHz in 66 MHz
  properties.

Greentime: I think this may be interesting to you since the
FTIDE020 will need the same bindings so we can probably
just reuse them and maybe make the parser a library if you
want to upstream the FTIDE020.

Faraday people: I do not have it from a source that this
hardware is really FTIDE010 but I would be VERY surprised
if it is not. U-Boot has an FTIDE020 IDE controller
synthesized in the Andestech platform, and it has a similar
yet different register layout, featuring similar timing
set-ups:
http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/block/ftide020.h
http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/block/ftide020.c
---
 .../devicetree/bindings/ata/faraday,ftide010.txt   | 38 ++++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ata/faraday,ftide010.txt

diff --git a/Documentation/devicetree/bindings/ata/faraday,ftide010.txt b/Documentation/devicetree/bindings/ata/faraday,ftide010.txt
new file mode 100644
index 000000000000..a0c64a29104d
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/faraday,ftide010.txt
@@ -0,0 +1,38 @@
+* Faraday Technology FTIDE010 PATA controller
+
+This controller is the first Faraday IDE interface block, used in the
+StorLink SL2312 and SL3516, later known as the Cortina Systems Gemini
+platform. The controller can do PIO modes 0 through 4, Multi-word DMA
+(MWDM)modes 0 through 2 and Ultra DMA modes 0 through 6.
+
+On the Gemini platform, this PATA block is accompanied by a PATA to
+SATA bridge in order to support SATA. This is why a phandle to that
+controller is compulsory on that platform.
+
+The timing properties are unique per-SoC, not per-board.
+
+Required properties:
+- compatible: should be one of
+  "cortina,gemini-pata", "faraday,ftide010"
+  "faraday,ftide010"
+- interrupts: interrupt for the block
+- reg: registers and size for the block
+
+Optional properties:
+- clocks: a SoC clock running the peripheral.
+- clock-names: should be set to "PCLK" for the peripheral clock.
+
+Required properties for "cortina,gemini-pata" compatible:
+- sata: a phande to the Gemini PATA to SATA bridge, see
+  cortina,gemini-sata-bridge.txt for details.
+
+Example:
+
+ata at 63000000 {
+	compatible = "cortina,gemini-pata", "faraday,ftide010";
+	reg = <0x63000000 0x100>;
+	interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+	clocks = <&gcc GEMINI_CLK_GATE_IDE>;
+	clock-names = "PCLK";
+	sata = <&sata>;
+};
-- 
2.9.4