[PATCH 13/41] mmc: host: omap_hsmmc: Add support to set IODELAY values
Kishon Vijay Abraham I
kishon at ti.com
Fri May 19 01:15:13 PDT 2017
The data manual of J6/J6 Eco recommends to set different IODELAY values
depending on the mode in which the MMC/SD is enumerated in order to
ensure IO timings are met.
Add support to set the IODELAY values depending on the various MMC
modes using the pinctrl APIs.
Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
[nsekhar at ti.com: introduce OMAP_HSMMC_SETUP_PINCTRL()]
Signed-off-by: Sekhar Nori <nsekhar at ti.com>
---
.../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 5 +
drivers/mmc/host/omap_hsmmc.c | 124 ++++++++++++++++++++-
include/linux/platform_data/hsmmc-omap.h | 3 +
3 files changed, 129 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
index 258e25af10f7..dcf0b777c031 100644
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -20,6 +20,11 @@ Optional properties:
ti,dual-volt: boolean, supports dual voltage cards
<supply-name>-supply: phandle to the regulator device tree node
"supply-name" examples are "vmmc", "vmmc_aux" etc
+pinctrl-names: Should be a list of pinctrl state names and can be "sdr104",
+"hs200_1_8v", "ddr50", "sdr50", "sdr25", "sdr12", "hs", "ddr_1_8v" or
+"default".
+pinctrl-<num>: Phandle referencing pin configuration of the sd/emmc controller.
+See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
ti,non-removable: non-removable slot (like eMMC)
ti,needs-special-reset: Requires a special softreset sequence
ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index b28f0e9631ce..7271c7e3144c 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -258,6 +258,18 @@ struct omap_hsmmc_host {
struct timer_list timer;
unsigned long long data_timeout;
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pinctrl_state;
+ struct pinctrl_state *default_pinctrl_state;
+ struct pinctrl_state *sdr104_pinctrl_state;
+ struct pinctrl_state *hs200_1_8v_pinctrl_state;
+ struct pinctrl_state *ddr50_pinctrl_state;
+ struct pinctrl_state *sdr50_pinctrl_state;
+ struct pinctrl_state *sdr25_pinctrl_state;
+ struct pinctrl_state *sdr12_pinctrl_state;
+ struct pinctrl_state *hs_pinctrl_state;
+ struct pinctrl_state *ddr_1_8v_pinctrl_state;
+
/* return MMC cover switch state, can be NULL if not supported.
*
* possible return values:
@@ -1729,6 +1741,8 @@ static void omap_hsmmc_request(struct mmc_host *mmc, struct mmc_request *req)
static void omap_hsmmc_set_timing(struct omap_hsmmc_host *host)
{
u32 val;
+ int ret;
+ struct pinctrl_state *pinctrl_state;
struct mmc_ios *ios = &host->mmc->ios;
omap_hsmmc_stop_clock(host);
@@ -1738,35 +1752,54 @@ static void omap_hsmmc_set_timing(struct omap_hsmmc_host *host)
switch (ios->timing) {
case MMC_TIMING_UHS_SDR104:
val |= AC12_UHSMC_SDR104;
+ pinctrl_state = host->sdr104_pinctrl_state;
break;
case MMC_TIMING_MMC_HS200:
val |= AC12_UHSMC_SDR104;
+ pinctrl_state = host->hs200_1_8v_pinctrl_state;
break;
case MMC_TIMING_UHS_DDR50:
val |= AC12_UHSMC_DDR50;
+ pinctrl_state = host->ddr50_pinctrl_state;
break;
case MMC_TIMING_UHS_SDR50:
val |= AC12_UHSMC_SDR50;
+ pinctrl_state = host->sdr50_pinctrl_state;
break;
case MMC_TIMING_UHS_SDR25:
val |= AC12_UHSMC_SDR25;
+ pinctrl_state = host->sdr25_pinctrl_state;
break;
case MMC_TIMING_UHS_SDR12:
val |= AC12_UHSMC_SDR12;
+ pinctrl_state = host->sdr12_pinctrl_state;
break;
case MMC_TIMING_SD_HS:
case MMC_TIMING_MMC_HS:
val |= AC12_UHSMC_RES;
+ pinctrl_state = host->hs_pinctrl_state;
break;
case MMC_TIMING_MMC_DDR52:
val |= AC12_UHSMC_RES;
+ pinctrl_state = host->ddr_1_8v_pinctrl_state;
break;
default:
val |= AC12_UHSMC_RES;
+ pinctrl_state = host->default_pinctrl_state;
break;
}
OMAP_HSMMC_WRITE(host->base, AC12, val);
+ if (host->pdata->controller_flags & OMAP_HSMMC_REQUIRE_IODELAY) {
+ ret = pinctrl_select_state(host->pinctrl, pinctrl_state);
+ if (ret) {
+ dev_err(mmc_dev(host->mmc),
+ "failed to select pinctrl state\n");
+ return;
+ }
+ host->pinctrl_state = pinctrl_state;
+ }
+
omap_hsmmc_start_clock(host);
}
@@ -2357,8 +2390,14 @@ static struct omap_hsmmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
return ERR_PTR(-ENOMEM); /* out of memory */
legacy = dev_get_platdata(dev);
- if (legacy && legacy->name)
- pdata->name = legacy->name;
+ if (legacy) {
+ if (legacy->name)
+ pdata->name = legacy->name;
+ if (legacy->version)
+ pdata->version = legacy->version;
+ if (legacy->max_freq > 0)
+ pdata->max_freq = legacy->max_freq;
+ }
if (of_find_property(np, "ti,dual-volt", NULL))
pdata->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT;
@@ -2388,6 +2427,73 @@ static inline struct omap_hsmmc_platform_data
}
#endif
+#define OMAP_HSMMC_SETUP_PINCTRL(capvar, capmask, mode) \
+ do { \
+ struct pinctrl_state *s = ERR_PTR(-ENODEV); \
+ char str[20]; \
+ char *version = host->pdata->version; \
+ \
+ if (!(mmc->capvar & (capmask))) \
+ break; \
+ \
+ if (host->pdata->version) { \
+ sprintf(str, "%s-%s", #mode, version); \
+ s = pinctrl_lookup_state(host->pinctrl, str); \
+ } \
+ \
+ if (IS_ERR(s)) { \
+ sprintf(str, "%s", #mode); \
+ s = pinctrl_lookup_state(host->pinctrl, str); \
+ } \
+ \
+ if (IS_ERR(s)) { \
+ dev_err(host->dev, "no pinctrl state for %s " \
+ "mode\n", #mode); \
+ mmc->capvar &= ~(capmask); \
+ } else { \
+ host->mode##_pinctrl_state = s; \
+ } \
+ \
+ } while (0)
+
+static int omap_hsmmc_get_iodelay_pinctrl_state(struct omap_hsmmc_host *host)
+{
+ struct mmc_host *mmc = host->mmc;
+
+ if (!(host->pdata->controller_flags & OMAP_HSMMC_REQUIRE_IODELAY))
+ return 0;
+
+ host->pinctrl = devm_pinctrl_get(host->dev);
+ if (IS_ERR(host->pinctrl)) {
+ dev_err(host->dev, "Cannot get pinctrl\n");
+ return PTR_ERR(host->pinctrl);
+ }
+
+ host->default_pinctrl_state = pinctrl_lookup_state(host->pinctrl,
+ "default");
+ if (IS_ERR(host->default_pinctrl_state)) {
+ dev_err(host->dev,
+ "no pinctrl state for default mode\n");
+ return PTR_ERR(host->default_pinctrl_state);
+ }
+
+ OMAP_HSMMC_SETUP_PINCTRL(caps, MMC_CAP_UHS_SDR104, sdr104);
+ OMAP_HSMMC_SETUP_PINCTRL(caps, MMC_CAP_UHS_DDR50, ddr50);
+ OMAP_HSMMC_SETUP_PINCTRL(caps, MMC_CAP_UHS_SDR50, sdr50);
+ OMAP_HSMMC_SETUP_PINCTRL(caps, MMC_CAP_UHS_SDR25, sdr25);
+ OMAP_HSMMC_SETUP_PINCTRL(caps, MMC_CAP_UHS_SDR12, sdr12);
+ OMAP_HSMMC_SETUP_PINCTRL(caps, MMC_CAP_1_8V_DDR, ddr_1_8v);
+ OMAP_HSMMC_SETUP_PINCTRL(caps,
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+ hs);
+ OMAP_HSMMC_SETUP_PINCTRL(caps2, MMC_CAP2_HS200_1_8V_SDR,
+ hs200_1_8v);
+
+ host->pinctrl_state = host->default_pinctrl_state;
+
+ return 0;
+}
+
static int omap_hsmmc_probe(struct platform_device *pdev)
{
struct omap_hsmmc_platform_data *pdata = pdev->dev.platform_data;
@@ -2535,6 +2641,10 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
omap_hsmmc_set_capabilities(host);
+ ret = omap_hsmmc_get_iodelay_pinctrl_state(host);
+ if (ret)
+ goto err_pinctrl;
+
host->rx_chan = dma_request_chan(&pdev->dev, "rx");
if (IS_ERR(host->rx_chan)) {
dev_err(mmc_dev(host->mmc), "RX DMA channel request failed\n");
@@ -2606,6 +2716,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
dma_release_channel(host->tx_chan);
if (!IS_ERR_OR_NULL(host->rx_chan))
dma_release_channel(host->rx_chan);
+err_pinctrl:
if (host->dbclk)
clk_disable_unprepare(host->dbclk);
pm_runtime_dont_use_autosuspend(host->dev);
@@ -2741,6 +2852,7 @@ static int omap_hsmmc_runtime_resume(struct device *dev)
{
struct omap_hsmmc_host *host;
unsigned long flags;
+ int ret;
host = platform_get_drvdata(to_platform_device(dev));
omap_hsmmc_context_restore(host);
@@ -2757,7 +2869,13 @@ static int omap_hsmmc_runtime_resume(struct device *dev)
OMAP_HSMMC_WRITE(host->base, ISE, CIRQ_EN);
OMAP_HSMMC_WRITE(host->base, IE, CIRQ_EN);
} else {
- pinctrl_pm_select_default_state(host->dev);
+ if (host->pinctrl) {
+ ret = pinctrl_select_state(host->pinctrl,
+ host->pinctrl_state);
+ if (ret)
+ dev_err(mmc_dev(host->mmc),
+ "failed to activate pinctrl state\n");
+ }
}
spin_unlock_irqrestore(&host->irq_lock, flags);
return 0;
diff --git a/include/linux/platform_data/hsmmc-omap.h b/include/linux/platform_data/hsmmc-omap.h
index 21832a357654..8e771851e07a 100644
--- a/include/linux/platform_data/hsmmc-omap.h
+++ b/include/linux/platform_data/hsmmc-omap.h
@@ -71,6 +71,9 @@ struct omap_hsmmc_platform_data {
#define HSMMC_HAS_HSPE_SUPPORT (1 << 2)
unsigned features;
+ /* string specifying a particular variant of hardware */
+ char *version;
+
int gpio_cd; /* gpio (card detect) */
int gpio_cod; /* gpio (cover detect) */
int gpio_wp; /* gpio (write protect) */
--
2.11.0
More information about the linux-arm-kernel
mailing list