[PATCH v3 00/21] drm: sun4i: Add support for the HDMI controller

[Chen-Yu Tsai]

On Wed, May 17, 2017 at 3:40 PM, Maxime Ripard
<maxime.ripard at free-electrons.com> wrote:
> Hi,
>
> Here is an attempt at getting the HDMI controller running.
>
> This HDMI controller is found on a number of old Allwinner SoCs (A10, A10s,
> A20, A31).
>
> This driver only supports for now the A10s because it was an easy target,
> being very close to the A13 that is already supported by our DRM driver.
>
> There's nothing out of the extraordinary there, except maybe the clock
> setup. All the internal clocks (TMDS, DDC) have been modeled using the
> common clock framework, the TMDS clock being the parent of the DDC one.
>
> While this might sound overkill, other SoC have a different, external
> source for the DDC clock, which will be easier to support through the clock
> framework.
>
> The IP also supports audio (through an already supported i2s controller,
> and some missing configuration in the HDMI controller) and CEC. Both will
> come eventually.
>
> Let me know what you think!
> Maxime
>
> Changes from v2:
>   - Fixed the PLL control macros definitions
>   - Called clk_enable / disable on the DDC clock
>   - Added the flags to enable the connection polling
>   - Fixed the vtotal computation in TCON's code, and added a comment
>   - Added and documented the A10s display engine compatible
>   - Reworked the component parsing code to bail out when a standard
>     connector is found
>   - Fixed a inconsistent comment in the predivider unapplication
>   - Fixed a commit log
>   - Added Chen-Yu's and Rob's Acked-By
>   - Changed divider_round_rate to a static, inline function in the header
>   - Added and document the A10s display pipeline compatible
>   - Rebased on top of 4.12
>
> Changes from v1:
>   - Fixed typos in the CCU header and the HDMI code
>   - Reintroduced the comment for the backporch timings
>   - Renamed the hdmi node to hdmi, instead of hdmi0
>   - Added support for hdmi-connector
>   - Added a separate Kconfig option for the HDMI support
>   - Changed the TCON muxing configuration for an explicit call in the
>     TCON's "clients"
>   - Fixed the initialisation sequence that was clearing the clocks bits
>   - Constified the HDMI's structures and removed whitespaces errors
>   - Fixed an issue in the sunxi-ng code that was not reporting the proper
>     parent clock rate if it was modified
>   - Removed unused headers
>   - Removed CLK_SET_RATE_PARENT for the DDC clock
>   - Used the DDC address defines
>   - Removed the interlace flag that wasn't supported at the moment
>   - Moved most of the HDMI encoder init to the bind function like we do for
>     the other encoders
>   - Switched to drm_of_find_possible_crtcs
>   - Removed the extra printk that were still in my code
>   - Rebased on top of linux-next
>   - Removed the patch changing the divider_round_rate prototype to
>     introduce a new function instead that takes the parent clock to
>     evaluate
>   - Added a clk_set_rate for the hdmi module clock
>   - Fixed the V_TOTAL TCON ch0 calculation to be consistent with ch1's
>   - Defined all registers, and remove the TODOs
>   - Fixed the EDID issues by increasing the timeout.
>   - Added an atomic_check to prevent the DBLCLK modes to be used, as it is
>     not supported yet
>   - Updated the binding to add the interrupts and DMA channels
>
> Maxime Ripard (21):
>   clk: divider: Make divider_round_rate take the parent clock
>   clk: sunxi-ng: Pass the parent and a pointer to the clocks round rate
>   clk: sunxi-ng: div: Switch to divider_round_rate
>   clk: sunxi-ng: mux: Don't just rely on the parent for CLK_SET_RATE_PARENT
>   clk: sunxi-ng: mux: split out the pre-divider computation code
>   clk: sunxi-ng: mux: Change pre-divider application function prototype
>   clk: sunxi-ng: mux: Re-adjust parent rate
>   clk: sunxi-ng: sun5i: Export video PLLs

Merged patches 1 ~ 8 and ...

>   drm/sun4i: tcon: Add channel debug
>   drm/sun4i: tcon: Move the muxing out of the mode set function
>   drm/sun4i: tcon: Switch mux on only for composite
>   drm/sun4i: tcon: Fix tcon channel 1 backporch calculation
>   drm/sun4i: tcon: Change vertical total size computation inconsistency
>   drm/sun4i: tcon: multiply the vtotal when not in interlace
>   drm/sun4i: Ignore the generic connectors for components
>   dt-bindings: display: sun4i: Add HDMI display bindings
>   dt-bindings: display: sun4i: Add allwinner,tcon-channel property
>   drm/sun4i: Add HDMI support
>   drm/sun4i: Add compatible for the A10s pipeline

>   ARM: sun5i: a10s: Add the HDMI controller node
>   ARM: sun5i: a10s-olinuxino: Enable HDMI

... 20 ~ 21 for 4.13.

ChenYu