[PATCH v3 00/21] drm: sun4i: Add support for the HDMI controller
Maxime Ripard
maxime.ripard at free-electrons.com
Wed May 17 00:40:29 PDT 2017
Hi,
Here is an attempt at getting the HDMI controller running.
This HDMI controller is found on a number of old Allwinner SoCs (A10, A10s,
A20, A31).
This driver only supports for now the A10s because it was an easy target,
being very close to the A13 that is already supported by our DRM driver.
There's nothing out of the extraordinary there, except maybe the clock
setup. All the internal clocks (TMDS, DDC) have been modeled using the
common clock framework, the TMDS clock being the parent of the DDC one.
While this might sound overkill, other SoC have a different, external
source for the DDC clock, which will be easier to support through the clock
framework.
The IP also supports audio (through an already supported i2s controller,
and some missing configuration in the HDMI controller) and CEC. Both will
come eventually.
Let me know what you think!
Maxime
Changes from v2:
- Fixed the PLL control macros definitions
- Called clk_enable / disable on the DDC clock
- Added the flags to enable the connection polling
- Fixed the vtotal computation in TCON's code, and added a comment
- Added and documented the A10s display engine compatible
- Reworked the component parsing code to bail out when a standard
connector is found
- Fixed a inconsistent comment in the predivider unapplication
- Fixed a commit log
- Added Chen-Yu's and Rob's Acked-By
- Changed divider_round_rate to a static, inline function in the header
- Added and document the A10s display pipeline compatible
- Rebased on top of 4.12
Changes from v1:
- Fixed typos in the CCU header and the HDMI code
- Reintroduced the comment for the backporch timings
- Renamed the hdmi node to hdmi, instead of hdmi0
- Added support for hdmi-connector
- Added a separate Kconfig option for the HDMI support
- Changed the TCON muxing configuration for an explicit call in the
TCON's "clients"
- Fixed the initialisation sequence that was clearing the clocks bits
- Constified the HDMI's structures and removed whitespaces errors
- Fixed an issue in the sunxi-ng code that was not reporting the proper
parent clock rate if it was modified
- Removed unused headers
- Removed CLK_SET_RATE_PARENT for the DDC clock
- Used the DDC address defines
- Removed the interlace flag that wasn't supported at the moment
- Moved most of the HDMI encoder init to the bind function like we do for
the other encoders
- Switched to drm_of_find_possible_crtcs
- Removed the extra printk that were still in my code
- Rebased on top of linux-next
- Removed the patch changing the divider_round_rate prototype to
introduce a new function instead that takes the parent clock to
evaluate
- Added a clk_set_rate for the hdmi module clock
- Fixed the V_TOTAL TCON ch0 calculation to be consistent with ch1's
- Defined all registers, and remove the TODOs
- Fixed the EDID issues by increasing the timeout.
- Added an atomic_check to prevent the DBLCLK modes to be used, as it is
not supported yet
- Updated the binding to add the interrupts and DMA channels
Maxime Ripard (21):
clk: divider: Make divider_round_rate take the parent clock
clk: sunxi-ng: Pass the parent and a pointer to the clocks round rate
clk: sunxi-ng: div: Switch to divider_round_rate
clk: sunxi-ng: mux: Don't just rely on the parent for CLK_SET_RATE_PARENT
clk: sunxi-ng: mux: split out the pre-divider computation code
clk: sunxi-ng: mux: Change pre-divider application function prototype
clk: sunxi-ng: mux: Re-adjust parent rate
clk: sunxi-ng: sun5i: Export video PLLs
drm/sun4i: tcon: Add channel debug
drm/sun4i: tcon: Move the muxing out of the mode set function
drm/sun4i: tcon: Switch mux on only for composite
drm/sun4i: tcon: Fix tcon channel 1 backporch calculation
drm/sun4i: tcon: Change vertical total size computation inconsistency
drm/sun4i: tcon: multiply the vtotal when not in interlace
drm/sun4i: Ignore the generic connectors for components
dt-bindings: display: sun4i: Add HDMI display bindings
dt-bindings: display: sun4i: Add allwinner,tcon-channel property
drm/sun4i: Add HDMI support
drm/sun4i: Add compatible for the A10s pipeline
ARM: sun5i: a10s: Add the HDMI controller node
ARM: sun5i: a10s-olinuxino: Enable HDMI
Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt | 91 +-
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 29 +-
arch/arm/boot/dts/sun5i-a10s.dtsi | 47 +-
arch/arm/boot/dts/sun5i.dtsi | 1 +-
drivers/clk/clk-divider.c | 19 +-
drivers/clk/sunxi-ng/ccu-sun5i.h | 6 +-
drivers/clk/sunxi-ng/ccu_div.c | 38 +-
drivers/clk/sunxi-ng/ccu_mp.c | 15 +-
drivers/clk/sunxi-ng/ccu_mult.c | 19 +-
drivers/clk/sunxi-ng/ccu_mux.c | 90 +-
drivers/clk/sunxi-ng/ccu_mux.h | 11 +-
drivers/clk/sunxi-ng/ccu_nkm.c | 7 +-
drivers/gpu/drm/sun4i/Kconfig | 9 +-
drivers/gpu/drm/sun4i/Makefile | 6 +-
drivers/gpu/drm/sun4i/sun4i_drv.c | 13 +-
drivers/gpu/drm/sun4i/sun4i_hdmi.h | 157 ++-
drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c | 127 ++-
drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 501 +++++++-
drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c | 225 +++-
drivers/gpu/drm/sun4i/sun4i_rgb.c | 1 +-
drivers/gpu/drm/sun4i/sun4i_tcon.c | 62 +-
drivers/gpu/drm/sun4i/sun4i_tcon.h | 4 +-
drivers/gpu/drm/sun4i/sun4i_tv.c | 1 +-
include/dt-bindings/clock/sun5i-ccu.h | 3 +-
include/linux/clk-provider.h | 16 +-
25 files changed, 1378 insertions(+), 120 deletions(-)
create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi.h
create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c
create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c
base-commit: cf80aeef958f2e5b0041c72b567ae949f5b2738d
--
git-series 0.9.1
More information about the linux-arm-kernel
mailing list