[PATCH v2 03/11] clk: bcm: Add clocks for Stingray SOC
Anup Patel
anup.patel at broadcom.com
Mon May 15 05:02:13 PDT 2017
From: Sandeep Tripathy <sandeep.tripathy at broadcom.com>
This patch adds support for Stingray clocks in iproc
ccf. The Stingray SOC has various plls based on iproc
pll architecture.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy at broadcom.com>
Reviewed-by: Ray Jui <ray.jui at broadcom.com>
Reviewed-by: Scott Branden <scott.branden at broadcom.com>
---
drivers/clk/bcm/Kconfig | 8 ++
drivers/clk/bcm/Makefile | 1 +
drivers/clk/bcm/clk-sr.c | 300 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 309 insertions(+)
create mode 100644 drivers/clk/bcm/clk-sr.c
diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
index b5ae531..1d9187d 100644
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
@@ -46,3 +46,11 @@ config CLK_BCM_NS2
default ARCH_BCM_IPROC
help
Enable common clock framework support for the Broadcom Northstar 2 SoC
+
+config CLK_BCM_SR
+ bool "Broadcom Stingray clock support"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ select COMMON_CLK_IPROC
+ default ARCH_BCM_IPROC
+ help
+ Enable common clock framework support for the Broadcom Stingray SoC
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index d9dc848..a0c14fa 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_ARCH_BCM_53573) += clk-bcm53573-ilp.o
obj-$(CONFIG_CLK_BCM_CYGNUS) += clk-cygnus.o
obj-$(CONFIG_CLK_BCM_NSP) += clk-nsp.o
obj-$(CONFIG_CLK_BCM_NS2) += clk-ns2.o
+obj-$(CONFIG_CLK_BCM_SR) += clk-sr.o
diff --git a/drivers/clk/bcm/clk-sr.c b/drivers/clk/bcm/clk-sr.c
new file mode 100644
index 0000000..0ef08cf
--- /dev/null
+++ b/drivers/clk/bcm/clk-sr.c
@@ -0,0 +1,300 @@
+/*
+ * Copyright 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation (the "GPL").
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License version 2 (GPLv2) for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * version 2 (GPLv2) along with this source code.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/bcm-sr.h>
+#include "clk-iproc.h"
+
+#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
+
+#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
+ .pwr_shift = ps, .iso_shift = is }
+
+#define SW_CTRL_VAL(o, s) { .offset = o, .shift = s, }
+
+#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
+ .p_reset_shift = prs }
+
+#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
+ .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
+ .ka_width = kaw }
+
+#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
+
+#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
+ .hold_shift = hs, .bypass_shift = bs }
+
+
+static const struct iproc_pll_ctrl genpll0 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 5, 1, 0),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl genpll0_clk[] = {
+ [BCM_SR_GENPLL0_SATA_CLK] = {
+ .channel = BCM_SR_GENPLL0_SATA_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+ [BCM_SR_GENPLL0_SCR_CLK] = {
+ .channel = BCM_SR_GENPLL0_SCR_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 7, 1, 13),
+ .mdiv = REG_VAL(0x18, 10, 9),
+ },
+ [BCM_SR_GENPLL0_250M_CLK] = {
+ .channel = BCM_SR_GENPLL0_250M_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 8, 2, 14),
+ .mdiv = REG_VAL(0x18, 20, 9),
+ },
+ [BCM_SR_GENPLL0_PCIE_AXI_CLK] = {
+ .channel = BCM_SR_GENPLL0_PCIE_AXI_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 9, 3, 15),
+ .mdiv = REG_VAL(0x1c, 0, 9),
+ },
+ [BCM_SR_GENPLL0_PAXC_AXI_X2_CLK] = {
+ .channel = BCM_SR_GENPLL0_PAXC_AXI_X2_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 10, 4, 16),
+ .mdiv = REG_VAL(0x1c, 10, 9),
+ },
+ [BCM_SR_GENPLL0_PAXC_AXI_CLK] = {
+ .channel = BCM_SR_GENPLL0_PAXC_AXI_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 11, 5, 17),
+ .mdiv = REG_VAL(0x1c, 20, 9),
+ },
+};
+
+static void __init sr_genpll0_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &genpll0, NULL, 0, genpll0_clk,
+ ARRAY_SIZE(genpll0_clk));
+}
+CLK_OF_DECLARE(sr_genpll0_clk, "brcm,sr-genpll0",
+ sr_genpll0_clk_init);
+
+static const struct iproc_pll_ctrl genpll3 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 1, 19, 18),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl genpll3_clk[] = {
+ [BCM_SR_GENPLL3_HSLS_CLK] = {
+ .channel = BCM_SR_GENPLL3_HSLS_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+ [BCM_SR_GENPLL3_SDIO_CLK] = {
+ .channel = BCM_SR_GENPLL3_SDIO_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 7, 1, 13),
+ .mdiv = REG_VAL(0x18, 10, 9),
+ },
+};
+
+static void __init sr_genpll3_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &genpll3, NULL, 0, genpll3_clk,
+ ARRAY_SIZE(genpll3_clk));
+}
+CLK_OF_DECLARE(sr_genpll3_clk, "brcm,sr-genpll3",
+ sr_genpll3_clk_init);
+
+static const struct iproc_pll_ctrl genpll4 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 1, 25, 24),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl genpll4_clk[] = {
+ [BCM_SR_GENPLL4_CCN_CLK] = {
+ .channel = BCM_SR_GENPLL4_CCN_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+};
+
+static void __init sr_genpll4_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &genpll4, NULL, 0, genpll4_clk,
+ ARRAY_SIZE(genpll4_clk));
+}
+CLK_OF_DECLARE(sr_genpll4_clk, "brcm,sr-genpll4",
+ sr_genpll4_clk_init);
+
+static const struct iproc_pll_ctrl genpll5 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 1, 1, 0),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl genpll5_clk[] = {
+ [BCM_SR_GENPLL5_FS_CLK] = {
+ .channel = BCM_SR_GENPLL5_FS_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+ [BCM_SR_GENPLL5_SPU_CLK] = {
+ .channel = BCM_SR_GENPLL5_SPU_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 10, 9),
+ },
+};
+
+static void __init sr_genpll5_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &genpll5, NULL, 0, genpll5_clk,
+ ARRAY_SIZE(genpll5_clk));
+}
+CLK_OF_DECLARE(sr_genpll5_clk, "brcm,sr-genpll5",
+ sr_genpll5_clk_init);
+
+static const struct iproc_pll_ctrl lcpll0 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 2, 19, 18),
+ .reset = RESET_VAL(0x0, 31, 30),
+ .sw_ctrl = SW_CTRL_VAL(0x4, 31),
+ .ndiv_int = REG_VAL(0x4, 16, 10),
+ .pdiv = REG_VAL(0x4, 26, 4),
+ .status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl lcpll0_clk[] = {
+ [BCM_SR_LCPLL0_SATA_REF_CLK] = {
+ .channel = BCM_SR_LCPLL0_SATA_REF_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 7, 1, 13),
+ .mdiv = REG_VAL(0x14, 0, 9),
+ },
+ [BCM_SR_LCPLL0_USB_REF_CLK] = {
+ .channel = BCM_SR_LCPLL0_USB_REF_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 8, 2, 14),
+ .mdiv = REG_VAL(0x14, 10, 9),
+ },
+ [BCM_SR_LCPLL0_SATA_REFPN_CLK] = {
+ .channel = BCM_SR_LCPLL0_SATA_REFPN_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 9, 3, 15),
+ .mdiv = REG_VAL(0x14, 20, 9),
+ },
+};
+
+static void __init sr_lcpll0_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &lcpll0, NULL, 0, lcpll0_clk,
+ ARRAY_SIZE(lcpll0_clk));
+}
+CLK_OF_DECLARE(sr_lcpll0_clk, "brcm,sr-lcpll0",
+ sr_lcpll0_clk_init);
+
+static const struct iproc_pll_ctrl lcpll1 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 2, 22, 21),
+ .reset = RESET_VAL(0x0, 31, 30),
+ .sw_ctrl = SW_CTRL_VAL(0x4, 31),
+ .ndiv_int = REG_VAL(0x4, 16, 10),
+ .pdiv = REG_VAL(0x4, 26, 4),
+ .status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl lcpll1_clk[] = {
+ [BCM_SR_LCPLL1_WAN_CLK] = {
+ .channel = BCM_SR_LCPLL1_WAN_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 7, 1, 13),
+ .mdiv = REG_VAL(0x14, 0, 9),
+ },
+};
+
+static void __init sr_lcpll1_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &lcpll1, NULL, 0, lcpll1_clk,
+ ARRAY_SIZE(lcpll1_clk));
+}
+CLK_OF_DECLARE(sr_lcpll1_clk, "brcm,sr-lcpll1",
+ sr_lcpll1_clk_init);
+
+static const struct iproc_pll_ctrl lcpll_pcie = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 2, 25, 24),
+ .reset = RESET_VAL(0x0, 31, 30),
+ .sw_ctrl = SW_CTRL_VAL(0x4, 31),
+ .ndiv_int = REG_VAL(0x4, 16, 10),
+ .pdiv = REG_VAL(0x4, 26, 4),
+ .status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl lcpll_pcie_clk[] = {
+ [BCM_SR_LCPLL_PCIE_PHY_REF_CLK] = {
+ .channel = BCM_SR_LCPLL_PCIE_PHY_REF_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 7, 1, 13),
+ .mdiv = REG_VAL(0x14, 0, 9),
+ },
+};
+
+static void __init sr_lcpll_pcie_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &lcpll_pcie, NULL, 0, lcpll_pcie_clk,
+ ARRAY_SIZE(lcpll_pcie_clk));
+}
+CLK_OF_DECLARE(sr_lcpll_pcie_clk, "brcm,sr-lcpll-pcie",
+ sr_lcpll_pcie_clk_init);
--
2.7.4
More information about the linux-arm-kernel
mailing list