[PATCH v2 16/18] arm64: dts: meson-gxl-s905x-nexbox-a95x: Fix node order

Neil Armstrong narmstrong at baylibre.com
Mon May 15 01:17:01 PDT 2017


On 05/13/2017 04:33 PM, Andreas Färber wrote:
> Sort nodes referenced by label alphabetically.
> 
> Signed-off-by: Andreas Färber <afaerber at suse.de>
> ---
>  v1 -> v2:
>  * Rebased (new nodes added)
>  
>  .../dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts    | 52 +++++++++++-----------
>  1 file changed, 26 insertions(+), 26 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
> index 8873c058fad2..6633a5d8fdd3 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
> @@ -140,10 +140,10 @@
>  	};
>  };
>  
> -&uart_AO {
> -	status = "okay";
> -	pinctrl-0 = <&uart_ao_a_pins>;
> -	pinctrl-names = "default";
> +&cvbs_vdac_port {
> +	cvbs_vdac_out: endpoint {
> +		remote-endpoint = <&cvbs_connector_in>;
> +	};
>  };
>  
>  &ethmac {
> @@ -152,12 +152,32 @@
>  	phy-handle = <&internal_phy>;
>  };
>  
> +&hdmi_tx {
> +	status = "okay";
> +	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&hdmi_tx_tmds_port {
> +	hdmi_tx_tmds_out: endpoint {
> +		remote-endpoint = <&hdmi_connector_in>;
> +	};
> +};
> +
>  &ir {
>  	status = "okay";
>  	pinctrl-0 = <&remote_input_ao_pins>;
>  	pinctrl-names = "default";
>  };
>  
> +&pwm_ef {
> +	status = "okay";
> +	pinctrl-0 = <&pwm_e_pins>;
> +	pinctrl-names = "default";
> +	clocks = <&clkc CLKID_FCLK_DIV4>;
> +	clock-names = "clkin0";
> +};
> +
>  /* Wireless SDIO Module */
>  &sd_emmc_a {
>  	status = "okay";
> @@ -217,28 +237,8 @@
>  	vqmmc-supply = <&vddio_boot>;
>  };
>  
> -&pwm_ef {
> -	status = "okay";
> -	pinctrl-0 = <&pwm_e_pins>;
> -	pinctrl-names = "default";
> -	clocks = <&clkc CLKID_FCLK_DIV4>;
> -	clock-names = "clkin0";
> -};
> -
> -&cvbs_vdac_port {
> -	cvbs_vdac_out: endpoint {
> -		remote-endpoint = <&cvbs_connector_in>;
> -	};
> -};
> -
> -&hdmi_tx {
> +&uart_AO {
>  	status = "okay";
> -	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
> +	pinctrl-0 = <&uart_ao_a_pins>;
>  	pinctrl-names = "default";
>  };
> -
> -&hdmi_tx_tmds_port {
> -	hdmi_tx_tmds_out: endpoint {
> -		remote-endpoint = <&hdmi_connector_in>;
> -	};
> -};
> 

Hi Andreas,

Like a previous attempt, I'm not OK with such rework since it will break bisect and add complexity for new patches handling.

The order is not alphabetically ordered, live with it.

Neil



More information about the linux-arm-kernel mailing list