[PATCH 4/5] dt-bindings: phy: Modify Broadcom NS USB 3.0 PHY binding to use MDIO

[Rob Herring]

On Thu, May 11, 2017 at 03:29:24PM +0200, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal at milecki.pl>
> 
> Thanks to work done by Broadcom explaining their USB 3.0 PHY details we
> know it's attached to the MDIO bus. Use this knowledge to update the
> binding: make it a subnode to the MDIO bus and rework way of specifying
> required registers.

Please document here that you are breaking compatibility and why you 
think that is okay.

> 
> Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
> ---
>  .../devicetree/bindings/phy/bcm-ns-usb3-phy.txt    | 27 +++++++++++++++-------
>  1 file changed, 19 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
> index 09aeba94538d..32f057260351 100644
> --- a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
> @@ -3,9 +3,10 @@ Driver for Broadcom Northstar USB 3.0 PHY
>  Required properties:
>  
>  - compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy".
> -- reg: register mappings for DMP (Device Management Plugin) and ChipCommon B
> -       MMI.
> -- reg-names: "dmp" and "ccb-mii"
> +- reg: address of MDIO bus device
> +- usb3-dmp-syscon: phandle to syscon with DMP (Device Management Plugin)
> +		   registers
> +- #phy-cells: must be 0
>  
>  Initialization of USB 3.0 PHY depends on Northstar version. There are currently
>  three known series: Ax, Bx and Cx.
> @@ -15,9 +16,19 @@ Known B1: BCM4707 rev 6
>  Known C0: BCM47094 rev 0
>  
>  Example:
> -	usb3-phy {
> -		compatible = "brcm,ns-ax-usb3-phy";
> -		reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
> -		reg-names = "dmp", "ccb-mii";
> -		#phy-cells = <0>;
> +	mdio: mdio at 0 {
> +		reg = <0x0>;
> +		#size-cells = <1>;
> +		#address-cells = <0>;
> +
> +		usb3-phy at 10 {
> +			compatible = "brcm,ns-ax-usb3-phy";
> +			reg = <0x10>;
> +			usb3-dmp-syscon = <&usb3_dmp>;
> +			#phy-cells = <0>;
> +		};
> +	};
> +
> +	usb3_dmp: syscon at 18105000 {
> +		reg = <0x18105000 0x1000>;
>  	};
> -- 
> 2.11.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html