[PATCH v3 1/3] arm64: dts: r8a7795: Add support for R-Car H3 ES2.0
Simon Horman
horms at verge.net.au
Thu May 11 07:53:30 PDT 2017
On Thu, May 11, 2017 at 01:58:52PM +0200, Geert Uytterhoeven wrote:
> Update r8a7795.dtsi so it corresponds to R-Car H3 ES2.0 or later:
> - The following devices no longer exist on ES2.0, and are thus removed:
> fcpf2, fcpvd3, fcpvi2, fdp1-2, usb3-if1, vspd3, vspi2.
> - The DU <-> VSPD topology is different on ES2.0, hence remove the
> "compatible" and "vsps" properties from the DU node until the driver
> can handle this.
>
> Move support for the ES1.x revision of the R-Car H3 SoC into a
> separate file. To avoid duplication, r8a7795-es1.dtsi includes
> r8a7795.dtsi, add adds/removes/overrides device nodes and properties
> where needed.
I think the above should be re-worded given your explanation below the
scissors that no deletion or overriding occurs.
>
> Switch r8a7795-salvator-x.dts and r8a7795-h3ulcb.dts from r8a7795.dtsi
> to r8a7795-es1.dtsi to preserve compatibility.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
> ---
> While currently r8a7795-es1.dtsi only adds device nodes, removal of
> devices nodes and properties can be implemented using the /delete-node/
> and /delete-property/ keywords, as shown below:
>
> &soc {
> /delete-node/ <name>@<addr>;
> };
>
> &<label> {
> /delete-property/ <prop>;
> };
I would be interested to also see an example of an override and
for the examples to be included in the changelog itself.
>
> v3:
> - Rebase on top of common Salvator-X board support extraction,
> - Remove the "compatible" property from the DU node in r8a7795.dtsi,
> in addition to the "vsps" property,
>
> v2:
> - Use a separate file for ES1.x instead of for ES2.0, so r8a7795.dtsi
> always corresponds to the latest SoC revision,
> - Add a dash between SoC part number and revision, for compatibility
> with the BSP,
> - Enhance the hardware description from basic support to everything
> already supported on ES1.x (except for DU due VSP),
> - Let r8a7795-es1.dtsi include r8a7795.dtsi.
> ---
> arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi | 84 ++++++++++++++++++++++
> arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 4 +-
> arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 4 +-
> arch/arm64/boot/dts/renesas/r8a7795.dtsi | 71 +-----------------
> 4 files changed, 89 insertions(+), 74 deletions(-)
> create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
> new file mode 100644
> index 0000000000000000..a0ba7bd21ea3aa18
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
> @@ -0,0 +1,84 @@
> +/*
> + * Device Tree Source for the r8a7795 ES1.x SoC
> + *
> + * Copyright (C) 2015 Renesas Electronics Corp.
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2. This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +#include "r8a7795.dtsi"
> +
> +&soc {
> + xhci1: usb at ee0400000 {
> + compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
> + reg = <0 0xee040000 0 0xc00>;
> + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 327>;
> + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> + resets = <&cpg 327>;
> + status = "disabled";
> + };
> +
> + fcpf2: fcp at fe952000 {
> + compatible = "renesas,fcpf";
> + reg = <0 0xfe952000 0 0x200>;
> + clocks = <&cpg CPG_MOD 613>;
> + power-domains = <&sysc R8A7795_PD_A3VP>;
> + resets = <&cpg 613>;
> + };
> +
> + vspi2: vsp at fe9c0000 {
> + compatible = "renesas,vsp2";
> + reg = <0 0xfe9c0000 0 0x8000>;
> + interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 629>;
> + power-domains = <&sysc R8A7795_PD_A3VP>;
> + resets = <&cpg 629>;
> +
> + renesas,fcp = <&fcpvi2>;
> + };
> +
> + fcpvi2: fcp at fe9cf000 {
> + compatible = "renesas,fcpv";
> + reg = <0 0xfe9cf000 0 0x200>;
> + clocks = <&cpg CPG_MOD 609>;
> + power-domains = <&sysc R8A7795_PD_A3VP>;
> + resets = <&cpg 609>;
> + };
> +
> + vspd3: vsp at fea38000 {
> + compatible = "renesas,vsp2";
> + reg = <0 0xfea38000 0 0x4000>;
> + interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 620>;
> + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> + resets = <&cpg 620>;
> +
> + renesas,fcp = <&fcpvd3>;
> + };
> +
> + fcpvd3: fcp at fea3f000 {
> + compatible = "renesas,fcpv";
> + reg = <0 0xfea3f000 0 0x200>;
> + clocks = <&cpg CPG_MOD 600>;
> + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> + resets = <&cpg 600>;
> + };
> +
> + fdp1 at fe948000 {
> + compatible = "renesas,fdp1";
> + reg = <0 0xfe948000 0 0x2400>;
> + interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 117>;
> + power-domains = <&sysc R8A7795_PD_A3VP>;
> + resets = <&cpg 117>;
> + renesas,fcp = <&fcpf2>;
> + };
> +};
> +
> +&du {
> + compatible = "renesas,du-r8a7795";
> + vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
> +};
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
> index a1fbf0ab8ad8e425..95fe207cb6a3fd2f 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
> @@ -12,11 +12,11 @@
> #define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
>
> /dts-v1/;
> -#include "r8a7795.dtsi"
> +#include "r8a7795-es1.dtsi"
> #include "ulcb.dtsi"
>
> / {
> - model = "Renesas H3ULCB board based on r8a7795";
> + model = "Renesas H3ULCB board based on r8a7795 ES1.x";
> compatible = "renesas,h3ulcb", "renesas,r8a7795";
>
> memory at 48000000 {
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
> index 52fce67df3413f1f..be5b2e966ea1700e 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
> @@ -11,11 +11,11 @@
> #define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
>
> /dts-v1/;
> -#include "r8a7795.dtsi"
> +#include "r8a7795-es1.dtsi"
> #include "salvator-x.dtsi"
>
> / {
> - model = "Renesas Salvator-X board based on r8a7795";
> + model = "Renesas Salvator-X board based on r8a7795 ES1.x";
> compatible = "renesas,salvator-x", "renesas,r8a7795";
>
> memory at 48000000 {
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> index 7d87dff70ac84c40..e2c447cc12fe7f3a 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> @@ -182,7 +182,7 @@
> clock-frequency = <0>;
> };
>
> - soc {
> + soc: soc {
> compatible = "simple-bus";
> interrupt-parent = <&gic>;
>
> @@ -1274,16 +1274,6 @@
> status = "disabled";
> };
>
> - xhci1: usb at ee0400000 {
> - compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
> - reg = <0 0xee040000 0 0xc00>;
> - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 327>;
> - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> - resets = <&cpg 327>;
> - status = "disabled";
> - };
> -
> usb_dmac0: dma-controller at e65a0000 {
> compatible = "renesas,r8a7795-usb-dmac",
> "renesas,usb-dmac";
> @@ -1568,14 +1558,6 @@
> resets = <&cpg 614>;
> };
>
> - fcpf2: fcp at fe952000 {
> - compatible = "renesas,fcpf";
> - reg = <0 0xfe952000 0 0x200>;
> - clocks = <&cpg CPG_MOD 613>;
> - power-domains = <&sysc R8A7795_PD_A3VP>;
> - resets = <&cpg 613>;
> - };
> -
> vspbd: vsp at fe960000 {
> compatible = "renesas,vsp2";
> reg = <0 0xfe960000 0 0x8000>;
> @@ -1633,25 +1615,6 @@
> resets = <&cpg 610>;
> };
>
> - vspi2: vsp at fe9c0000 {
> - compatible = "renesas,vsp2";
> - reg = <0 0xfe9c0000 0 0x8000>;
> - interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 629>;
> - power-domains = <&sysc R8A7795_PD_A3VP>;
> - resets = <&cpg 629>;
> -
> - renesas,fcp = <&fcpvi2>;
> - };
> -
> - fcpvi2: fcp at fe9cf000 {
> - compatible = "renesas,fcpv";
> - reg = <0 0xfe9cf000 0 0x200>;
> - clocks = <&cpg CPG_MOD 609>;
> - power-domains = <&sysc R8A7795_PD_A3VP>;
> - resets = <&cpg 609>;
> - };
> -
> vspd0: vsp at fea20000 {
> compatible = "renesas,vsp2";
> reg = <0 0xfea20000 0 0x4000>;
> @@ -1709,25 +1672,6 @@
> resets = <&cpg 601>;
> };
>
> - vspd3: vsp at fea38000 {
> - compatible = "renesas,vsp2";
> - reg = <0 0xfea38000 0 0x4000>;
> - interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 620>;
> - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> - resets = <&cpg 620>;
> -
> - renesas,fcp = <&fcpvd3>;
> - };
> -
> - fcpvd3: fcp at fea3f000 {
> - compatible = "renesas,fcpv";
> - reg = <0 0xfea3f000 0 0x200>;
> - clocks = <&cpg CPG_MOD 600>;
> - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> - resets = <&cpg 600>;
> - };
> -
> fdp1 at fe940000 {
> compatible = "renesas,fdp1";
> reg = <0 0xfe940000 0 0x2400>;
> @@ -1748,18 +1692,7 @@
> renesas,fcp = <&fcpf1>;
> };
>
> - fdp1 at fe948000 {
> - compatible = "renesas,fdp1";
> - reg = <0 0xfe948000 0 0x2400>;
> - interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 117>;
> - power-domains = <&sysc R8A7795_PD_A3VP>;
> - resets = <&cpg 117>;
> - renesas,fcp = <&fcpf2>;
> - };
> -
> du: display at feb00000 {
> - compatible = "renesas,du-r8a7795";
> reg = <0 0xfeb00000 0 0x80000>,
> <0 0xfeb90000 0 0x14>;
> reg-names = "du", "lvds.0";
> @@ -1775,8 +1708,6 @@
> clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
> status = "disabled";
>
> - vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
> -
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
> --
> 2.7.4
>
More information about the linux-arm-kernel
mailing list