[PATCH 1/5] phy: bcm-ns-usb3: always wait for idle after writing to the PHY reg
Rafał Miłecki
zajec5 at gmail.com
Thu May 11 06:29:21 PDT 2017
From: Rafał Miłecki <rafal at milecki.pl>
Move MDIO specific code to the writing helper function. This makes init
code a bit more generic and doesn't require it to track what happens
after every write.
Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
drivers/phy/phy-bcm-ns-usb3.c | 11 +----------
1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/drivers/phy/phy-bcm-ns-usb3.c b/drivers/phy/phy-bcm-ns-usb3.c
index 22b5e7047fa6..5e89326886dc 100644
--- a/drivers/phy/phy-bcm-ns-usb3.c
+++ b/drivers/phy/phy-bcm-ns-usb3.c
@@ -112,7 +112,7 @@ static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,
tmp |= value;
writel(tmp, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
- return 0;
+ return bcm_ns_usb3_mii_mng_wait_idle(usb3);
}
static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3)
@@ -143,9 +143,6 @@ static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3)
/* Deaaserting PLL Reset */
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0x8000);
- /* Waiting MII Mgt interface idle */
- bcm_ns_usb3_mii_mng_wait_idle(usb3);
-
/* Deasserting USB3 system reset */
writel(0, usb3->dmp + BCMA_RESET_CTL);
@@ -169,9 +166,6 @@ static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3)
/* Enabling SSC */
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003);
- /* Waiting MII Mgt interface idle */
- bcm_ns_usb3_mii_mng_wait_idle(usb3);
-
return 0;
}
@@ -205,9 +199,6 @@ static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3)
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003);
- /* Waiting MII Mgt interface idle */
- bcm_ns_usb3_mii_mng_wait_idle(usb3);
-
/* Deasserting USB3 system reset */
writel(0, usb3->dmp + BCMA_RESET_CTL);
--
2.11.0
More information about the linux-arm-kernel
mailing list