[PATCH] ARM: dts: imx28: add gpio-ranges for internal gpio controller

Shawn Guo shawnguo at kernel.org
Thu May 11 00:51:36 PDT 2017


On Mon, May 08, 2017 at 10:59:25AM +0200, Uwe Kleine-König wrote:
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
> ---
> Hello,
> 
> with this patch applied I get the following lines in dmesg which looks
> fine:
> 
> 	[    0.227913] gpio gpiochip0: (80018000.pinctrl:gpio at 0): created GPIO range 0->31 ==> 80018000.pinctrl PIN 0->31
> 	[    0.236100] gpio gpiochip1: (80018000.pinctrl:gpio at 1): created GPIO range 0->31 ==> 80018000.pinctrl PIN 32->63
> 	[    0.244463] gpio gpiochip2: (80018000.pinctrl:gpio at 2): created GPIO range 0->31 ==> 80018000.pinctrl PIN 64->95
> 	[    0.253020] gpio gpiochip3: (80018000.pinctrl:gpio at 3): created GPIO range 0->31 ==> 80018000.pinctrl PIN 96->127
> 	[    0.261639] gpio gpiochip4: (80018000.pinctrl:gpio at 4): created GPIO range 0->31 ==> 80018000.pinctrl PIN 128->159
> 
> But when looking at a used gpio
> 
> 	# cat /sys/kernel/debug/gpio
> 	gpiochip0: GPIOs 0-31, parent: platform/80018000.pinctrl:gpio at 0, 80018000.pinctrl:gpio at 0:
> 	...
> 	 gpio-20  (LED4                |?                   ) out hi
> 	...
> 
> 	# grep "pin 20 " /sys/kernel/debug/pinctrl/80018000.pinctrl/pinmux-pins
> 	pin 20 (GPMI_RDY0): leds (GPIO UNCLAIMED) function leds group leds.0
> 
> I wonder why there is still "GPIO UNCLAIMED". I would have expected that
> this disappears and somehow references the gpio_request issued by the
> led-gpio driver after my patch.
> 
> What am I missing?

It seems that's only the case where @strict of struct pinmux_ops is
true.  We should set it true for pinctrl-mxs, I guess?

Shawn

> 
> Best regards
> Uwe
> 
>  arch/arm/boot/dts/imx28.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
> index 148fcf4d3b98..cfad2295cc46 100644
> --- a/arch/arm/boot/dts/imx28.dtsi
> +++ b/arch/arm/boot/dts/imx28.dtsi
> @@ -182,6 +182,7 @@
>  					#gpio-cells = <2>;
>  					interrupt-controller;
>  					#interrupt-cells = <2>;
> +					gpio-ranges = <&pinctrl 0 0 32>;
>  				};
>  
>  				gpio1: gpio at 1 {
> @@ -192,6 +193,7 @@
>  					#gpio-cells = <2>;
>  					interrupt-controller;
>  					#interrupt-cells = <2>;
> +					gpio-ranges = <&pinctrl 0 32 32>;
>  				};
>  
>  				gpio2: gpio at 2 {
> @@ -202,6 +204,7 @@
>  					#gpio-cells = <2>;
>  					interrupt-controller;
>  					#interrupt-cells = <2>;
> +					gpio-ranges = <&pinctrl 0 64 32>;
>  				};
>  
>  				gpio3: gpio at 3 {
> @@ -212,6 +215,7 @@
>  					#gpio-cells = <2>;
>  					interrupt-controller;
>  					#interrupt-cells = <2>;
> +					gpio-ranges = <&pinctrl 0 96 32>;
>  				};
>  
>  				gpio4: gpio at 4 {
> @@ -222,6 +226,7 @@
>  					#gpio-cells = <2>;
>  					interrupt-controller;
>  					#interrupt-cells = <2>;
> +					gpio-ranges = <&pinctrl 0 128 32>;
>  				};
>  
>  				duart_pins_a: duart at 0 {
> -- 
> 2.11.0
> 



More information about the linux-arm-kernel mailing list