[PATCH 1/6] tty: serial: lpuart: introduce lpuart_soc_data to represent SoC property
Dong Aisheng
dongas86 at gmail.com
Tue May 9 23:06:27 PDT 2017
Hi Stefan,
On Wed, May 10, 2017 at 11:50 AM, Stefan Agner <stefan at agner.ch> wrote:
> On 2017-05-09 00:50, Dong Aisheng wrote:
>> This is used to dynamically check the SoC specific lpuart properies.
>> Currently only the checking of 32 bit register width is added which
>> functions the same as before. More will be added later for supporting
>> new chips.
>>
>> Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
>> Cc: Jiri Slaby <jslaby at suse.com>
>> Cc: Fugang Duan <fugang.duan at nxp.com>
>> Cc: Stefan Agner <stefan at agner.ch>
>> Cc: Mingkai Hu <Mingkai.Hu at nxp.com>
>> Cc: Yangbo Lu <yangbo.lu at nxp.com>
>> Signed-off-by: Dong Aisheng <aisheng.dong at nxp.com>
>> ---
>> drivers/tty/serial/fsl_lpuart.c | 25 ++++++++++++++++++-------
>> 1 file changed, 18 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
>> index 15df1ba7..cd4e905 100644
>> --- a/drivers/tty/serial/fsl_lpuart.c
>> +++ b/drivers/tty/serial/fsl_lpuart.c
>> @@ -258,13 +258,21 @@ struct lpuart_port {
>> wait_queue_head_t dma_wait;
>> };
>>
>> +struct lpuart_soc_data {
>> + bool is_32;
>> +};
>> +
>> +static struct lpuart_soc_data vf_data = {
>> + .is_32 = false,
>> +};
>> +
>> +static struct lpuart_soc_data ls_data = {
>> + .is_32 = true,
>> +};
>
> This could be const I guess?
>
Yes, of course.
Thanks for the pointing out.
Regards
Dong Aisheng
> --
> Stefan
>
>> +
>> static const struct of_device_id lpuart_dt_ids[] = {
>> - {
>> - .compatible = "fsl,vf610-lpuart",
>> - },
>> - {
>> - .compatible = "fsl,ls1021a-lpuart",
>> - },
>> + { .compatible = "fsl,vf610-lpuart", .data = &vf_data, },
>> + { .compatible = "fsl,ls1021a-lpuart", .data = &ls_data, },
>> { /* sentinel */ }
>> };
>> MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
>> @@ -1971,6 +1979,9 @@ static struct uart_driver lpuart_reg = {
>>
>> static int lpuart_probe(struct platform_device *pdev)
>> {
>> + const struct of_device_id *of_id = of_match_device(lpuart_dt_ids,
>> + &pdev->dev);
>> + const struct lpuart_soc_data *sdata = of_id->data;
>> struct device_node *np = pdev->dev.of_node;
>> struct lpuart_port *sport;
>> struct resource *res;
>> @@ -1988,7 +1999,7 @@ static int lpuart_probe(struct platform_device *pdev)
>> return ret;
>> }
>> sport->port.line = ret;
>> - sport->lpuart32 = of_device_is_compatible(np, "fsl,ls1021a-lpuart");
>> + sport->lpuart32 = sdata->is_32;
>>
>> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> sport->port.membase = devm_ioremap_resource(&pdev->dev, res);
More information about the linux-arm-kernel
mailing list