[PATCH 1/4] ata: Add DT bindings for Faraday Technology FTIDE010
Linus Walleij
linus.walleij at linaro.org
Sat May 6 05:10:50 PDT 2017
This adds device tree bindings for the Faraday Technology
FTIDE010 found in the Storlink/Storm/Cortina Systems Gemini SoC.
I am not 100% sure that this part if from Faraday Technology but
a lot points in that direction:
- A later IDE interface called FTIDE020 exist and share some
properties.
- The SATA bridge has the same Built In Self Test (BIST) that the
Faraday FTSATA100 seems to have, and it has version number 0100
in the device ID register, so this is very likely a FTSATA100
bundled with the FTIDE010.
Cc: devicetree at vger.kernel.org
Cc: John Feng-Hsin Chiang <john453 at faraday-tech.com>
Cc: Greentime Hu <green.hu at gmail.com>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
Greentime: I think this may be interesting to you since the
FTIDE020 will need the same bindings so we can probably
just reuse them and maybe make the parser a library if you
want to upstream the FTIDE020.
Faraday people: I do not have it from a source that this
hardware is really FTIDE010 but I would be VERY surprised
if it is not. U-Boot has an FTIDE020 IDE controller
synthesized in the Andestech platform, and it has a similar
yet different register layout, featuring similar timing
set-ups:
http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/block/ftide020.h
http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/block/ftide020.c
---
.../devicetree/bindings/ata/faraday,ftide010.txt | 63 ++++++++++++++++++++++
1 file changed, 63 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ata/faraday,ftide010.txt
diff --git a/Documentation/devicetree/bindings/ata/faraday,ftide010.txt b/Documentation/devicetree/bindings/ata/faraday,ftide010.txt
new file mode 100644
index 000000000000..5048408c07c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/faraday,ftide010.txt
@@ -0,0 +1,63 @@
+* Faraday Technology FTIDE010 PATA controller
+
+This controller is the first Faraday IDE interface block, used in the
+StorLink SL2312 and SL3516, later known as the Cortina Systems Gemini
+platform. The controller can do PIO modes 0 through 4, Multi-word DMA
+(MWDM)modes 0 through 2 and Ultra DMA modes 0 through 6.
+
+On the Gemini platform, this PATA block is accompanied by a PATA to
+SATA bridge in order to support SATA. This is why a phandle to that
+controller is compulsory on that platform.
+
+The timing properties are unique per-SoC, not per-board.
+
+Required properties:
+- compatible: should be one of
+ "cortina,gemini-pata", "faraday,ftide010"
+ "faraday,ftide010"
+- interrupts: interrupt for the block
+- reg: registers and size for the block
+
+ The unit of the below required timings is two clock periods of the ATA
+ reference clock which is 30 nanoseconds per unit at 66MHz and 20 nanoseconds
+ per unit at 50 MHz.
+
+- faraday,pio-active-time: array of 5 elements for T2 timing for Mode 0,
+ 1, 2, 3 and 4. Range 0..15.
+- faraday,pio-recovery-time: array of 5 elements for T2l timing for Mode 0,
+ 1, 2, 3 and 4. Range 0..15.
+- faraday,mdma-50-active-time: array of 4 elements for Td timing for multi
+ word DMA, Mode 0, 1, and 2 at 50 MHz. Range 0..15.
+- faraday,mdma-50-recovery-time: array of 4 elements for Tk timing for
+ multi word DMA, Mode 0, 1 and 2 at 50 MHz. Range 0..15.
+- faraday,mdma-66-active-time: array of 4 elements for Td timing for multi
+ word DMA, Mode 0, 1 and 2 at 50 MHz. Range 0..15.
+- faraday,mdma-66-recovery-time: array of 4 elements for Tk timing for
+ multi word DMA, Mode 0, 1 and 2 at 50 MHz. Range 0..15.
+- faraday,udma-50-setup-time: array of 4 elements for Tvds timing for ultra
+ DMA, Mode 0, 1, 2, 3, 4 and 5 at 50 MHz. Range 0..7.
+- faraday,udma-50-hold-time: array of 4 elements for Tdvh timing for
+ multi word DMA, Mode 0, 1, 2, 3, 4 and 5 at 50 MHz, Range 0..7.
+- faraday,udma-66-setup-time: array of 4 elements for Tvds timing for multi
+ word DMA, Mode 0, 1, 2, 3, 4, 5 and 6 at 50 MHz. Range 0..7.
+- faraday,udma-66-hold-time: array of 4 elements for Tdvh timing for
+ multi word DMA, Mode 0, 1, 2, 3, 4, 5 and 6 at 50 MHz. Range 0..7.
+
+Optional properties:
+- clocks: a SoC clock running the peripheral.
+- clock-names: should be set to "PCLK" for the peripheral clock.
+
+Required properties for "cortina,gemini-pata" compatible:
+- sata: a phande to the Gemini PATA to SATA bridge, see
+ cortina,gemini-sata-bridge.txt for details.
+
+Example:
+
+ata at 63000000 {
+ compatible = "cortina,gemini-pata", "faraday,ftide010";
+ reg = <0x63000000 0x100>;
+ interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&gcc GEMINI_CLK_GATE_IDE>;
+ clock-names = "PCLK";
+ sata = <&sata>;
+};
--
2.9.3
More information about the linux-arm-kernel
mailing list