[PATCH v4] irqchip/gicv3-its: Avoid memory over allocation for ITEs

[Shanker Donthineni]

Hi Marc,


On 05/02/2017 11:16 AM, Marc Zyngier wrote:
> On Sun, Apr 30 2017 at  3:36:15 pm BST, Shanker Donthineni <shankerd at codeaurora.org> wrote:
>> We are always allocating extra 255Bytes of memory to handle ITE
>> physical address alignment requirement. The kmalloc() satisfies
>> the ITE alignment since the ITS driver is requesting a minimum
>> size of ITS_ITT_ALIGN bytes.
>>
>> Let's try to allocate the exact amount of memory that is required
>> for ITEs to avoid wastage.
>>
>> Signed-off-by: Shanker Donthineni <shankerd at codeaurora.org>
>> ---
>> Changes:
>> v2: removed 'Change-Id: Ia8084189833f2081ff13c392deb5070c46a64038' from commit.
>> v3: changed from IITE to ITE.
>> v3: removed fallback since kmalloc() guarantees the right alignment.
>>
>>  drivers/irqchip/irq-gic-v3-its.c | 6 +++---
>>  1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
>> index 45ea1933..72e56f03 100644
>> --- a/drivers/irqchip/irq-gic-v3-its.c
>> +++ b/drivers/irqchip/irq-gic-v3-its.c
>> @@ -261,7 +261,6 @@ static struct its_collection *its_build_mapd_cmd(struct its_cmd_block *cmd,
>>  	u8 size = ilog2(desc->its_mapd_cmd.dev->nr_ites);
>>  
>>  	itt_addr = virt_to_phys(desc->its_mapd_cmd.dev->itt);
>> -	itt_addr = ALIGN(itt_addr, ITS_ITT_ALIGN);
>>  
>>  	its_encode_cmd(cmd, GITS_CMD_MAPD);
>>  	its_encode_devid(cmd, desc->its_mapd_cmd.dev->device_id);
>> @@ -1329,13 +1328,14 @@ static struct its_device *its_create_device(struct its_node *its, u32 dev_id,
>>  	 */
>>  	nr_ites = max(2UL, roundup_pow_of_two(nvecs));
>>  	sz = nr_ites * its->ite_size;
>> -	sz = max(sz, ITS_ITT_ALIGN) + ITS_ITT_ALIGN - 1;
>> +	sz = max(sz, ITS_ITT_ALIGN);
>>  	itt = kzalloc(sz, GFP_KERNEL);
>>  	lpi_map = its_lpi_alloc_chunks(nvecs, &lpi_base, &nr_lpis);
>>  	if (lpi_map)
>>  		col_map = kzalloc(sizeof(*col_map) * nr_lpis, GFP_KERNEL);
>>  
>> -	if (!dev || !itt || !lpi_map || !col_map) {
>> +	if (!dev || !itt || !lpi_map || !col_map ||
>> +	    !IS_ALIGNED(virt_to_phys(itt), ITS_ITT_ALIGN)) {
>>  		kfree(dev);
>>  		kfree(itt);
>>  		kfree(lpi_map);
> I'm confused. Either the alignment is guaranteed (and you should
> document why it is so), or it is not, and we need to handle the
> non-alignment (instead of failing).

Sorry for confusion, alignment is guaranteed by kmalloc(), added a check for readability purpose only can be removed.
 
> Thanks,
>
> 	M.

-- 
Shanker Donthineni
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.