[PATCH] ARM: dts: imx6sx-sdb: Remove cpufreq OPP override

[Shawn Guo]

On Tue, Apr 25, 2017 at 07:57:59PM +0300, Leonard Crestez wrote:
> The board file for imx6sx-dbg overrides cpufreq operating points to use

s/imx6sx-dbg/imx6sx-sdb

> higher voltages. This is done because the board has a shared rail for
> VDD_ARM_IN and VDD_SOC_IN and when using LDO bypass the shared voltage
> needs to be a value suitable for both ARM and SOC.
> 
> This was introduced in:
> 
> commit 54183bd7f766 ("ARM: imx6sx-sdb: add revb board and make it default")
> 
> This only only applies to LDO bypass mode, a feature not present in

s/only only/only

> upstream. When LDOs are enabled the effect is to use higher voltages than
> necesarry for no good reason.
> 
> Setting these higher voltages can make some boards fail to boot with ugly

Please make it clear it's RevC board.

> semi-random crashes, reminiscent of memory corruption. These failures
> happen the first time the lowest idle state is used. Remove the OPP
> override in order to fix those crashes.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez at nxp.com>

Please add tags for Fixes and Cc stable.

Shawn