[PATCH] arm: arm64: Add flash node for ls1088a qds and rdb

[Prabhakar Kushwaha]

LS1088AQDS consist of NOR, NAND and FPGA connected over IFC
LS1088ARDB consist of NAND and FPGA connected over IFC.

So add flash information in ifc node of device tree.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 27 +++++++++++++++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 20 +++++++++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi    |  4 ----
 3 files changed, 47 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 8c3cae5..ca7eb41 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -53,6 +53,33 @@
 	compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
 };
 
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	status = "okay";
+
+	ranges = <0 0 0x5 0x80000000 0x08000000
+		  2 0 0x5 0x30000000 0x00010000
+		  3 0 0x5 0x20000000 0x00010000>;
+
+	nor at 0,0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand at 2,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x2 0x0 0x10000>;
+	};
+
+	fpga: board-control at 3,0 {
+		compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis";
+		reg = <0x3 0x0 0x0000100>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 8a04fbb..726e167 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -53,6 +53,26 @@
 	compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
 };
 
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	status = "okay";
+
+	ranges = <0 0 0x5 0x30000000 0x00010000
+		  2 0 0x5 0x20000000 0x00010000>;
+
+	nand at 0,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x0 0x0 0x10000>;
+	};
+
+	fpga: board-control at 2,0 {
+		compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis";
+		reg = <0x2 0x0 0x0000100>;
+	};
+};
+
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 2946fd7..9f6bcb4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -217,10 +217,6 @@
 			#address-cells = <2>;
 			#size-cells = <1>;
 
-			ranges = <0 0 0x5 0x80000000 0x08000000
-				  2 0 0x5 0x30000000 0x00010000
-				  3 0 0x5 0x20000000 0x00010000>;
-			status = "disabled";
 		};
 
 		i2c0: i2c at 2000000 {
-- 
2.7.4