[PATCH v2] iommu/arm-smmu: Add global SMR masking property
Mark Rutland
mark.rutland at arm.com
Fri Mar 31 05:43:55 PDT 2017
On Fri, Mar 31, 2017 at 12:03:33PM +0100, Robin Murphy wrote:
> The current SMR masking support using a 2-cell iommu-specifier is
> primarily intended to handle individual masters with large and/or
> complex Stream ID assignments; it quickly gets a bit clunky in other SMR
> use-cases where we just want to consistently mask out the same part of
> every Stream ID (e.g. for MMU-500 configurations where the appended TBU
> number gets in the way unnecessarily). Let's add a new property to allow
> a single global mask value to better fit the latter situation.
>
> Tested-by: Nipun Gupta <nipun.gupta at nxp.com>
> Signed-off-by: Robin Murphy <robin.murphy at arm.com>
> ---
>
> v2: Rewrite the documentation to actually make sense, and add an
> explicit example per Mark's suggestion.
>
> .../devicetree/bindings/iommu/arm,smmu.txt | 27 ++++++++++++++++++++++
> drivers/iommu/arm-smmu.c | 4 +++-
> 2 files changed, 30 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> index 6cdf32d037fc..b744b231766f 100644
> --- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> @@ -60,6 +60,16 @@ conditions.
> aliases of secure registers have to be used during
> SMMU configuration.
>
> +- stream-match-mask : For SMMUs supporting stream matching and using
> + #iommu-cells = <1>, specifies a fixed value to set in
> + the SMRn.MASK field of every stream match register
> + used, for cases where it is desirable to ignore some
> + portion of every Stream ID (e.g. for certain MMU-500
> + configurations given globally unique input IDs). This
> + property is not valid for SMMUs using stream indexing,
> + or using stream matching with #iommu-cells = <2>, and
> + may be ignored if present in such cases.
This generally sounds fine, but I'd like it to be a little more explicit
about what this means for matching. Can we change the first sentence to:
For SMMUs supporting stream matching and using
#iommu-cells = <1>, specifies a mask of bits to
ignore when matching stream IDs (e.g. this may be
programmed into the SMRn.MASK field of every
stream match register used).
Otherwise, this looks good to me; thanks for respinning this.
If you're happy to make the above change:
Acked-by: Mark Rutland <mark.rutland at arm.com>
Thanks,
Mark.
> +
> ** Deprecated properties:
>
> - mmu-masters (deprecated in favour of the generic "iommus" binding) :
> @@ -109,3 +119,20 @@ conditions.
> master3 {
> iommus = <&smmu2 1 0x30>;
> };
> +
> +
> + /* ARM MMU-500 with 10-bit stream ID input configuration */
> + smmu3: iommu {
> + compatible = "arm,mmu-500", "arm,smmu-v2";
> + ...
> + #iommu-cells = <1>;
> + /* always ignore appended 5-bit TBU number */
> + stream-match-mask = 0x7c00;
> + };
> +
> + bus {
> + /* bus whose child devices emit one unique 10-bit stream
> + ID each, but may master through multiple SMMU TBUs */
> + iommu-map = <0 &smmu3 0 0x400>;
> + ...
> + };
> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
> index abf6496843a6..e394d55146a6 100644
> --- a/drivers/iommu/arm-smmu.c
> +++ b/drivers/iommu/arm-smmu.c
> @@ -1590,13 +1590,15 @@ static int arm_smmu_domain_set_attr(struct iommu_domain *domain,
>
> static int arm_smmu_of_xlate(struct device *dev, struct of_phandle_args *args)
> {
> - u32 fwid = 0;
> + u32 mask, fwid = 0;
>
> if (args->args_count > 0)
> fwid |= (u16)args->args[0];
>
> if (args->args_count > 1)
> fwid |= (u16)args->args[1] << SMR_MASK_SHIFT;
> + else if (!of_property_read_u32(args->np, "stream-match-mask", &mask))
> + fwid |= (u16)mask << SMR_MASK_SHIFT;
>
> return iommu_fwspec_add_ids(dev, &fwid, 1);
> }
> --
> 2.11.0.dirty
>
More information about the linux-arm-kernel
mailing list