[PATCH v7 05/13] mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.c

Gregory CLEMENT gregory.clement at free-electrons.com
Thu Mar 30 08:22:57 PDT 2017


From: Hu Ziji <huziji at marvell.com>

Export sdhci_enable_sdio_irq() from sdhci.c.
Thus vendor SDHC driver can implement its specific SDIO irq
control.

Signed-off-by: Hu Ziji <huziji at marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
Acked-by: Adrian Hunter <adrian.hunter at intel.com>
---
 drivers/mmc/host/sdhci.c | 3 ++-
 drivers/mmc/host/sdhci.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index cc5bb9fb7706..5e090227c6c7 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1832,7 +1832,7 @@ static void sdhci_enable_sdio_irq_nolock(struct sdhci_host *host, int enable)
 	}
 }
 
-static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
+void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
 	unsigned long flags;
@@ -1846,6 +1846,7 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
 	sdhci_enable_sdio_irq_nolock(host, enable);
 	spin_unlock_irqrestore(&host->lock, flags);
 }
+EXPORT_SYMBOL_GPL(sdhci_enable_sdio_irq);
 
 int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
 				      struct mmc_ios *ios)
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index a741d8da6227..78437f82609e 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -706,6 +706,7 @@ int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
 void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
 int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
 				      struct mmc_ios *ios);
+void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable);
 
 #ifdef CONFIG_PM
 int sdhci_suspend_host(struct sdhci_host *host);
-- 
git-series 0.9.1



More information about the linux-arm-kernel mailing list