[PATCH] ARM: V7M: Do not corrupt vector table around v7m_invalidate_l1 call

[Vladimir Murzin]

We save/restore registers around v7m_invalidate_l1 to address pointed
by r12, which is vector table, so the first eight entries are
overwritten with a garbage. We already have stack setup at that stage,
so use it to save/restore register.

Fixes: 6a8146f420be ("ARM: 8609/1: V7M: Add support for the Cortex-M7 processor")
Signed-off-by: Vladimir Murzin <vladimir.murzin at arm.com>
---
 arch/arm/mm/proc-v7m.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S
index 8dea616..5049777 100644
--- a/arch/arm/mm/proc-v7m.S
+++ b/arch/arm/mm/proc-v7m.S
@@ -147,10 +147,10 @@ __v7m_setup_cont:
 
 	@ Configure caches (if implemented)
 	teq     r8, #0
-	stmneia	r12, {r0-r6, lr}	@ v7m_invalidate_l1 touches r0-r6
+	stmneia	sp, {r0-r6, lr}		@ v7m_invalidate_l1 touches r0-r6
 	blne	v7m_invalidate_l1
 	teq     r8, #0			@ re-evalutae condition
-	ldmneia	r12, {r0-r6, lr}
+	ldmneia	sp, {r0-r6, lr}
 
 	@ Configure the System Control Register to ensure 8-byte stack alignment
 	@ Note the STKALIGN bit is either RW or RAO.
-- 
1.9.1