[PATCH v4 12/23] drivers/fsi: Add documentation for GPIO bindings
Christopher Bostic
cbostic at linux.vnet.ibm.com
Wed Mar 29 10:43:29 PDT 2017
From: Chris Bostic <cbostic at linux.vnet.ibm.com>
Add fsi master gpio device tree binding documentation
Signed-off-by: Chris Bostic <cbostic at linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel at jms.id.au>
---
.../devicetree/bindings/fsi/fsi-master-gpio.txt | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
new file mode 100644
index 0000000..a767259
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
@@ -0,0 +1,24 @@
+Device-tree bindings for gpio-based FSI master driver
+-----------------------------------------------------
+
+Required properties:
+ - compatible = "fsi-master-gpio";
+ - clock-gpios = <gpio-descriptor>; : GPIO for FSI clock
+ - data-gpios = <gpio-descriptor>; : GPIO for FSI data signal
+
+Optional properties:
+ - enable-gpios = <gpio-descriptor>; : GPIO for enable signal
+ - trans-gpios = <gpio-descriptor>; : GPIO for voltage translator enable
+ - mux-gpios = <gpio-descriptor>; : GPIO for pin multiplexing with other
+ functions (eg, external FSI masters)
+
+Examples:
+
+ fsi-master {
+ compatible = "fsi-master-gpio", "fsi-master";
+ clock-gpios = <&gpio 0>;
+ data-gpios = <&gpio 1>;
+ enable-gpios = <&gpio 2>;
+ trans-gpios = <&gpio 3>;
+ mux-gpios = <&gpio 4>;
+ }
--
1.8.2.2
More information about the linux-arm-kernel
mailing list