[PATCH v3 05/11] Documentation: DT: bindings: input: touschcreen: remove sun4i documentation

Lee Jones lee.jones at linaro.org
Wed Mar 29 00:58:26 PDT 2017


On Tue, 21 Mar 2017, Quentin Schulz wrote:

> This patch removes the sun4i touchscreen controller binding
> documentation since it has been merged with the sun4i GPADC binding
> documentation.
> 
> Signed-off-by: Quentin Schulz <quentin.schulz at free-electrons.com>
> Acked-by: Rob Herring <robh at kernel.org>
> ---
> 
> added in v2
> 
>  .../bindings/input/touchscreen/sun4i.txt           | 38 ----------------------

Just an Input Ack missing here.

>  1 file changed, 38 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
> deleted file mode 100644
> index 89abecd..0000000
> --- a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
> +++ /dev/null
> @@ -1,38 +0,0 @@
> -sun4i resistive touchscreen controller
> ---------------------------------------
> -
> -Required properties:
> - - compatible: "allwinner,sun4i-a10-ts", "allwinner,sun5i-a13-ts" or
> -   "allwinner,sun6i-a31-ts"
> - - reg: mmio address range of the chip
> - - interrupts: interrupt to which the chip is connected
> - - #thermal-sensor-cells: shall be 0
> -
> -Optional properties:
> - - allwinner,ts-attached	 : boolean indicating that an actual touchscreen
> -				   is attached to the controller
> - - allwinner,tp-sensitive-adjust : integer (4 bits)
> -				   adjust sensitivity of pen down detection
> -				   between 0 (least sensitive) and 15
> -				   (defaults to 15)
> - - allwinner,filter-type	 : integer (2 bits)
> -				   select median and averaging filter
> -				   samples used for median / averaging filter
> -				   0: 4/2
> -				   1: 5/3
> -				   2: 8/4
> -				   3: 16/8
> -				   (defaults to 1)
> -
> -Example:
> -
> -	rtp: rtp at 01c25000 {
> -		compatible = "allwinner,sun4i-a10-ts";
> -		reg = <0x01c25000 0x100>;
> -		interrupts = <29>;
> -		allwinner,ts-attached;
> -		#thermal-sensor-cells = <0>;
> -		/* sensitive/noisy touch panel */
> -		allwinner,tp-sensitive-adjust = <0>;
> -		allwinner,filter-type = <3>;
> -	};

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog



More information about the linux-arm-kernel mailing list