[PATCH linux-next v2 1/4] usb: gadget: udc: atmel: Check fifo configuration values against device tree
cristian.birsan at microchip.com
cristian.birsan at microchip.com
Tue Mar 28 09:07:36 PDT 2017
From: Cristian Birsan <cristian.birsan at microchip.com>
Check fifo configuration values against device tree values for endpoint fifo
in auto configuration mode (fifo_mode=0).
Signed-off-by: Cristian Birsan <cristian.birsan at microchip.com>
---
drivers/usb/gadget/udc/atmel_usba_udc.c | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 2035906b..3fd43fb 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -2118,14 +2118,34 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
dev_err(&pdev->dev, "of_probe: fifo-size error(%d)\n", ret);
goto err;
}
- ep->fifo_size = fifo_mode ? udc->fifo_cfg[i].fifo_size : val;
+ if (fifo_mode) {
+ if (val < udc->fifo_cfg[i].fifo_size) {
+ dev_warn(&pdev->dev,
+ "of_probe: fifo-size table value not supported by HW, using DT value\n");
+ ep->fifo_size = val;
+ } else {
+ ep->fifo_size = udc->fifo_cfg[i].fifo_size;
+ }
+ } else {
+ ep->fifo_size = val;
+ }
ret = of_property_read_u32(pp, "atmel,nb-banks", &val);
if (ret) {
dev_err(&pdev->dev, "of_probe: nb-banks error(%d)\n", ret);
goto err;
}
- ep->nr_banks = fifo_mode ? udc->fifo_cfg[i].nr_banks : val;
+ if (fifo_mode) {
+ if (val < udc->fifo_cfg[i].nr_banks) {
+ dev_warn(&pdev->dev,
+ "of_probe: nb-banks table value not supported by HW, using DT value\n");
+ ep->nr_banks = val;
+ } else {
+ ep->nr_banks = udc->fifo_cfg[i].nr_banks;
+ }
+ } else {
+ ep->nr_banks = val;
+ }
ep->can_dma = of_property_read_bool(pp, "atmel,can-dma");
ep->can_isoc = of_property_read_bool(pp, "atmel,can-isoc");
--
2.7.4
More information about the linux-arm-kernel
mailing list