[PATCH v2, 2/3] tty/serial: meson_uart: add documentation for the dt-bindings
Helmut Klein
hgkr.klein at gmail.com
Tue Mar 28 02:25:44 PDT 2017
Add the documentation for the device tree binding of meson_uart
Signed-off-by: Helmut Klein <hgkr.klein at gmail.com>
---
.../bindings/serial/amlogic,meson_uart.txt | 25 ++++++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt b/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
new file mode 100644
index 000000000000..6f94ba25760d
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
@@ -0,0 +1,25 @@
+* Amlogic Meson UART, used in multiple SoCs (e.g. S905, s905X, ...)
+
+Required properties:
+- compatible : "amlogic,meson-uart"
+- reg : offset and length of the register set for the device.
+- interrupts : device interrupt
+- clocks : the baud rate clock for the UART and optionally the core clock for the none AO uarts
+e.g.
+uart_A: serial at 84c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0x0 0x84c0 0x0 0x14>;
+ pinctrl-0 = <&uart_a_pins &uart_a_cts_rts_pins>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&clkc CLKID_UART0>;
+ clock-names = "xtal", "core";
+ status = "ok";
+};
+
+Note: Each port should have an alias correctly numbered in "aliases" node.
+
+e.g.
+aliases {
+ serial0 = &uart_AO;
+ serial1 = &uart_A;
+};
--
2.11.0
More information about the linux-arm-kernel
mailing list