[PATCH v4 4/4] mvebu: wrt1900ac: Use pwm-fan rather than gpio-fan
Ralph Sennhauser
ralph.sennhauser at gmail.com
Mon Mar 27 12:43:00 PDT 2017
From: Andrew Lunn <andrew at lunn.ch>
The mvebu GPIO driver can also perform PWM on some pins. Use the pwm-fan
driver to control the fan of the WRT1900AC, giving us finer grained control
over its speed and hence noise.
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
URL: https://patchwork.ozlabs.org/patch/427291/
[Ralph Sennhauser: drop flags paramter from pwms, no longer used]
Signed-off-by: Ralph Sennhauser <ralph.sennhauser at gmail.com>
---
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 9efcf59..6d705f5 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -308,13 +308,11 @@
};
};
- gpio_fan {
+ pwm_fan {
/* SUNON HA4010V4-0000-C99 */
- compatible = "gpio-fan";
- gpios = <&gpio0 24 0>;
- gpio-fan,speed-map = <0 0
- 4500 1>;
+ compatible = "pwm-fan";
+ pwms = <&gpio0 24 4000>;
};
dsa {
--
2.10.2
More information about the linux-arm-kernel
mailing list