[GIT PULL] PCI: Support for configurable PCI endpoint
Kishon Vijay Abraham I
kishon at ti.com
Mon Mar 27 02:44:56 PDT 2017
Hi Bjorn,
Please find the pull request for PCI endpoint support below. I've
also included all the history here.
Changes from v4:
*) add #syscon-cells property and used of_parse_phandle_with_args
to perform a configuration in syscon module (as suggested by
Rob Herring)
*) Remove unnecessary white space.
Changes from v3:
*) fixed a typo and adapted to https://lkml.org/lkml/2017/3/13/562.
Changes from v2:
*) changed the configfs structure as suggested by Christoph Hellwig. With
this change the framework creates configfs entry for EP function driver
and EP controller. Previously these entries have to be created by the
the user. (Haven't changed the epc core or epf core except for invoking
configfs APIs to create entries for EP function driver and EP controller.
That's mostly because the EP function device can still be created by
directly invoking the epf core API without using configfs).
*) Now the user has to use configfs entry 'start' to start the link.
This was previously done by the function driver. However in the case of
multi function EP, the function driver shouldn't start the link.
Changes from v1:
*) The preparation patches for adding EP support is removed and is sent
separately
*) Added device ID for DRA74x/DRA72x and used it instead of
using "PCI_ANY_ID"
*) Added userguide for PCI endpoint test function
Major Improvements from RFC:
*) support multi-function devices (hw supported not virtual)
*) Access host side buffers
*) Raise MSI interrupts
*) Add user space program to use the host side PCI driver
*) Adapt all other users of designware to use the new design (only
compile tested. Since I have only dra7xx boards, the new design
has only been tested in dra7xx. I'd require the help of others
to test the platforms they have access to).
This series has been developed over 4.11-rc1 + [1]
[1] -> https://lkml.org/lkml/2017/3/13/562
Let me know if this has to be re-based to some of your branch.
Thanks
Kishon
The following changes since commit 623e87fec8ab7867fb51b3079196bd10718a60ce:
PCI: dwc: dra7xx: Push request_irq call to the bottom of probe (2017-03-22 20:35:30 +0530)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/pci-endpoint.git tags/pci-endpoint-for-4.12
for you to fetch changes up to e98bf80074be4654faae42fe0f5a622a776b6fdd:
ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP (2017-03-27 15:08:22 +0530)
----------------------------------------------------------------
pci: endpoint: for 4.12
*) Add PCI endpoint core layer
*) Modify designware and dra7xx driver to be configured in EP mode
*) Add a PCI endpoint *test* function driver and corresponding host
driver
Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
----------------------------------------------------------------
Kishon Vijay Abraham I (24):
PCI: endpoint: Add EP core layer to enable EP controller and EP functions
Documentation: PCI: Guide to use PCI Endpoint Core Layer
PCI: endpoint: Introduce configfs entry for configuring EP functions
Documentation: PCI: Guide to use pci endpoint configfs
PCI: endpoint: Create configfs entry for EPC device and EPF driver
Documentation: PCI: Add specification for the *pci test* function device
PCI: endpoint: functions: Add an EP function to test PCI
Documentation: PCI: Add binding documentation for pci-test endpoint function
PCI: dwc: designware: Add EP mode support
dt-bindings: PCI: Add dt bindings for pci designware EP mode
PCI: dwc: dra7xx: Facilitate wrapper and msi interrupts to be enabled independently
PCI: dwc: dra7xx: Add EP mode support
dt-bindings: PCI: dra7xx: Add dt bindings for pci dra7xx EP mode
dt-bindings: mfd: syscon: Add documentation for #syscon-cells property
PCI: dwc: dra7xx: Workaround for errata id i870
dt-bindings: PCI: dra7xx: Add dt bindings to enable unaligned access
PCI: Add device IDs for DRA74x and DRA72x
misc: Add host side pci driver for pci test function device
Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
tools: PCI: Add a userspace tool to test PCI endpoint
tools: PCI: Add sample test script to invoke pcitest
Documentation: PCI: Add userguide for PCI endpoint test function
MAINTAINERS: add PCI EP maintainer
ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
Documentation/PCI/00-INDEX | 10 +++
Documentation/PCI/endpoint/function/binding/pci-test.txt | 17 +++++
Documentation/PCI/endpoint/pci-endpoint-cfs.txt | 105 ++++++++++++++++++++++++++
Documentation/PCI/endpoint/pci-endpoint.txt | 215 ++++++++++++++++++++++++++++++++++++++++++++++++++++
Documentation/PCI/endpoint/pci-test-function.txt | 66 ++++++++++++++++
Documentation/PCI/endpoint/pci-test-howto.txt | 179 +++++++++++++++++++++++++++++++++++++++++++
Documentation/devicetree/bindings/mfd/syscon.txt | 2 +
Documentation/devicetree/bindings/pci/designware-pcie.txt | 26 +++++--
Documentation/devicetree/bindings/pci/ti-pci.txt | 42 +++++++++--
Documentation/misc-devices/pci-endpoint-test.txt | 35 +++++++++
MAINTAINERS | 9 +++
arch/arm/mach-omap2/clockdomains7xx_data.c | 2 +-
drivers/Makefile | 2 +
drivers/misc/Kconfig | 7 ++
drivers/misc/Makefile | 1 +
drivers/misc/pci_endpoint_test.c | 534 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/pci/Kconfig | 1 +
drivers/pci/dwc/Kconfig | 36 ++++++++-
drivers/pci/dwc/Makefile | 5 +-
drivers/pci/dwc/pci-dra7xx.c | 268 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
drivers/pci/dwc/pcie-designware-ep.c | 342 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/pci/dwc/pcie-designware.c | 125 ++++++++++++++++++++++++++++++
drivers/pci/dwc/pcie-designware.h | 112 +++++++++++++++++++++++++++
drivers/pci/endpoint/Kconfig | 31 ++++++++
drivers/pci/endpoint/Makefile | 7 ++
drivers/pci/endpoint/functions/Kconfig | 12 +++
drivers/pci/endpoint/functions/Makefile | 5 ++
drivers/pci/endpoint/functions/pci-epf-test.c | 510 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/pci/endpoint/pci-ep-cfs.c | 509 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/pci/endpoint/pci-epc-core.c | 579 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/pci/endpoint/pci-epc-mem.c | 143 +++++++++++++++++++++++++++++++++++
drivers/pci/endpoint/pci-epf-core.c | 351 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/linux/mod_devicetable.h | 10 +++
include/linux/pci-ep-cfs.h | 41 ++++++++++
include/linux/pci-epc.h | 144 +++++++++++++++++++++++++++++++++++
include/linux/pci-epf.h | 162 +++++++++++++++++++++++++++++++++++++++
include/linux/pci_ids.h | 2 +
include/uapi/linux/Kbuild | 1 +
include/uapi/linux/pcitest.h | 19 +++++
tools/pci/pcitest.c | 186 +++++++++++++++++++++++++++++++++++++++++++++
tools/pci/pcitest.sh | 56 ++++++++++++++
41 files changed, 4869 insertions(+), 40 deletions(-)
create mode 100644 Documentation/PCI/endpoint/function/binding/pci-test.txt
create mode 100644 Documentation/PCI/endpoint/pci-endpoint-cfs.txt
create mode 100644 Documentation/PCI/endpoint/pci-endpoint.txt
create mode 100644 Documentation/PCI/endpoint/pci-test-function.txt
create mode 100644 Documentation/PCI/endpoint/pci-test-howto.txt
create mode 100644 Documentation/misc-devices/pci-endpoint-test.txt
create mode 100644 drivers/misc/pci_endpoint_test.c
create mode 100644 drivers/pci/dwc/pcie-designware-ep.c
create mode 100644 drivers/pci/endpoint/Kconfig
create mode 100644 drivers/pci/endpoint/Makefile
create mode 100644 drivers/pci/endpoint/functions/Kconfig
create mode 100644 drivers/pci/endpoint/functions/Makefile
create mode 100644 drivers/pci/endpoint/functions/pci-epf-test.c
create mode 100644 drivers/pci/endpoint/pci-ep-cfs.c
create mode 100644 drivers/pci/endpoint/pci-epc-core.c
create mode 100644 drivers/pci/endpoint/pci-epc-mem.c
create mode 100644 drivers/pci/endpoint/pci-epf-core.c
create mode 100644 include/linux/pci-ep-cfs.h
create mode 100644 include/linux/pci-epc.h
create mode 100644 include/linux/pci-epf.h
create mode 100644 include/uapi/linux/pcitest.h
create mode 100644 tools/pci/pcitest.c
create mode 100644 tools/pci/pcitest.sh
--
2.11.0
More information about the linux-arm-kernel
mailing list