[PATCH v2 2/4] mvebu: xp: Add pwm properties to .dtsi files

Gregory CLEMENT gregory.clement at free-electrons.com
Fri Mar 24 01:37:11 PDT 2017


Hi Ralph,
 
 On ven., mars 24 2017, Ralph Sennhauser <ralph.sennhauser at gmail.com> wrote:

> On Thu, 23 Mar 2017 17:40:53 +0100
> Gregory CLEMENT <gregory.clement at free-electrons.com> wrote:
>
>> Hi Ralph,
>>  
>>  On sam., mars 18 2017, Ralph Sennhauser <ralph.sennhauser at gmail.com>
>> wrote:
>> 
>> It seems that I don't receive the 1st patch of the series.
>
> Hi Gregory,
>
> it makes no sense to only send part of a series to a recipient. Will

To be frank it depends. Some maintainers don't want to receive a patch
which is not related to their subsystem. But it is not my case, I prefer
to have the full picture.

> have to improve my use of --cc-cmd it seems. Will pay attention to this
> for v3.

Also don't forget to add te cover letter too if you have written one.

Thanks!

Gregory

>
> Sorry
> Ralph
>
>> 
>> Also could you refresh my mind to expose why these patchse were not
>> apply the first time and why we should apply them now?
>> 
>> Thanks,
>> 
>> Gregory
>> 
>> 
>> > From: Andrew Lunn <andrew at lunn.ch>
>> >
>> > Add properties to the gpio nodes to allow them to be also used as
>> > pwm lines.
>> >
>> > Signed-off-by: Andrew Lunn <andrew at lunn.ch>
>> > URL: https://patchwork.ozlabs.org/patch/427294/
>> > Signed-off-by: Ralph Sennhauser <ralph.sennhauser at gmail.com>
>> > ---
>> >  arch/arm/boot/dts/armada-370.dtsi        | 10 ++++++++--
>> >  arch/arm/boot/dts/armada-xp-mv78230.dtsi | 10 ++++++++--
>> >  arch/arm/boot/dts/armada-xp-mv78260.dtsi |  8 ++++++--
>> >  arch/arm/boot/dts/armada-xp-mv78460.dtsi | 10 ++++++++--
>> >  4 files changed, 30 insertions(+), 8 deletions(-)
>> >
>> > diff --git a/arch/arm/boot/dts/armada-370.dtsi
>> > b/arch/arm/boot/dts/armada-370.dtsi index cc011c8..aa9fe72 100644
>> > --- a/arch/arm/boot/dts/armada-370.dtsi
>> > +++ b/arch/arm/boot/dts/armada-370.dtsi
>> > @@ -138,24 +138,30 @@
>> >  
>> >  			gpio0: gpio at 18100 {
>> >  				compatible = "marvell,orion-gpio";
>> > -				reg = <0x18100 0x40>;
>> > +				reg = <0x18100 0x40>, <0x181c0
>> > 0x08>;
>> > +				reg-names = "gpio", "pwm";
>> >  				ngpios = <32>;
>> >  				gpio-controller;
>> >  				#gpio-cells = <2>;
>> > +				#pwm-cells = <2>;
>> >  				interrupt-controller;
>> >  				#interrupt-cells = <2>;
>> >  				interrupts = <82>, <83>, <84>,
>> > <85>;
>> > +				clocks = <&coreclk 0>;
>> >  			};
>> >  
>> >  			gpio1: gpio at 18140 {
>> >  				compatible = "marvell,orion-gpio";
>> > -				reg = <0x18140 0x40>;
>> > +				reg = <0x18140 0x40>, <0x181c8
>> > 0x08>;
>> > +				reg-names = "gpio", "pwm";
>> >  				ngpios = <32>;
>> >  				gpio-controller;
>> >  				#gpio-cells = <2>;
>> > +				#pwm-cells = <2>;
>> >  				interrupt-controller;
>> >  				#interrupt-cells = <2>;
>> >  				interrupts = <87>, <88>, <89>,
>> > <90>;
>> > +				clocks = <&coreclk 0>;
>> >  			};
>> >  
>> >  			gpio2: gpio at 18180 {
>> > diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
>> > b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 07c5090..fc3934f
>> > 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
>> > +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
>> > @@ -203,24 +203,30 @@
>> >  		internal-regs {
>> >  			gpio0: gpio at 18100 {
>> >  				compatible = "marvell,orion-gpio";
>> > -				reg = <0x18100 0x40>;
>> > +				reg = <0x18100 0x40>, <0x181c0
>> > 0x08>;
>> > +				reg-names = "gpio", "pwm";
>> >  				ngpios = <32>;
>> >  				gpio-controller;
>> >  				#gpio-cells = <2>;
>> > +				#pwm-cells = <2>;
>> >  				interrupt-controller;
>> >  				#interrupt-cells = <2>;
>> >  				interrupts = <82>, <83>, <84>,
>> > <85>;
>> > +				clocks = <&coreclk 0>;
>> >  			};
>> >  
>> >  			gpio1: gpio at 18140 {
>> >  				compatible = "marvell,orion-gpio";
>> > -				reg = <0x18140 0x40>;
>> > +				reg = <0x18140 0x40>, <0x181c8
>> > 0x08>;
>> > +				reg-names = "gpio", "pwm";
>> >  				ngpios = <17>;
>> >  				gpio-controller;
>> >  				#gpio-cells = <2>;
>> > +				#pwm-cells = <2>;
>> >  				interrupt-controller;
>> >  				#interrupt-cells = <2>;
>> >  				interrupts = <87>, <88>, <89>;
>> > +				clocks = <&coreclk 0>;
>> >  			};
>> >  		};
>> >  	};
>> > diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
>> > b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 64e936a..04dda6a
>> > 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
>> > +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
>> > @@ -286,24 +286,28 @@
>> >  		internal-regs {
>> >  			gpio0: gpio at 18100 {
>> >  				compatible = "marvell,orion-gpio";
>> > -				reg = <0x18100 0x40>;
>> > +				reg = <0x18100 0x40>, <0x181c0
>> > 0x08>;
>> > +				reg-names = "gpio", "pwm";
>> >  				ngpios = <32>;
>> >  				gpio-controller;
>> >  				#gpio-cells = <2>;
>> > +				#pwm-cells = <2>;
>> >  				interrupt-controller;
>> >  				#interrupt-cells = <2>;
>> >  				interrupts = <82>, <83>, <84>,
>> > <85>;
>> > +				clocks = <&coreclk 0>;
>> >  			};
>> >  
>> >  			gpio1: gpio at 18140 {
>> >  				compatible = "marvell,orion-gpio";
>> > -				reg = <0x18140 0x40>;
>> > +				reg = <0x18140 0x40>, <0x181c8
>> > 0x08>; ngpios = <32>;
>> >  				gpio-controller;
>> >  				#gpio-cells = <2>;
>> >  				interrupt-controller;
>> >  				#interrupt-cells = <2>;
>> >  				interrupts = <87>, <88>, <89>,
>> > <90>;
>> > +				clocks = <&coreclk 0>;
>> >  			};
>> >  
>> >  			gpio2: gpio at 18180 {
>> > diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
>> > b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index d1383dd..fb6d28a
>> > 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
>> > +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
>> > @@ -324,24 +324,30 @@
>> >  		internal-regs {
>> >  			gpio0: gpio at 18100 {
>> >  				compatible = "marvell,orion-gpio";
>> > -				reg = <0x18100 0x40>;
>> > +				reg = <0x18100 0x40>, <0x181c0
>> > 0x08>;
>> > +				reg-names = "gpio", "pwm";
>> >  				ngpios = <32>;
>> >  				gpio-controller;
>> >  				#gpio-cells = <2>;
>> > +				#pwm-cells = <2>;
>> >  				interrupt-controller;
>> >  				#interrupt-cells = <2>;
>> >  				interrupts = <82>, <83>, <84>,
>> > <85>;
>> > +				clocks = <&coreclk 0>;
>> >  			};
>> >  
>> >  			gpio1: gpio at 18140 {
>> >  				compatible = "marvell,orion-gpio";
>> > -				reg = <0x18140 0x40>;
>> > +				reg = <0x18140 0x40>, <0x181c8
>> > 0x08>;
>> > +				reg-names = "gpio", "pwm";
>> >  				ngpios = <32>;
>> >  				gpio-controller;
>> >  				#gpio-cells = <2>;
>> > +				#pwm-cells = <2>;
>> >  				interrupt-controller;
>> >  				#interrupt-cells = <2>;
>> >  				interrupts = <87>, <88>, <89>,
>> > <90>;
>> > +				clocks = <&coreclk 0>;
>> >  			};
>> >  
>> >  			gpio2: gpio at 18180 {
>> > -- 
>> > 2.10.2
>> >  
>> 
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com



More information about the linux-arm-kernel mailing list