[PATCH v5 0/2] mmc: host: s3cmci: add device tree support

[Ulf Hansson]

On 18 March 2017 at 02:13, Sergio Prado <sergio.prado at e-labworks.com> wrote:
> This series adds support for configuring Samsung's S3C24XX MMC/SD/SDIO
> controller via device tree.
>
> Tested on FriendlyARM mini2440, based on s3c2440 SoC.
>
> Changes since v4 (as suggested by Jaehoon Chung):
> - using just a flag as a data structure for the driver to check for
>   s3c2400 compatibility
>
> Changes since v3 (as suggested by Rob Herring):
> - describing properties that wasn't documented and removing unnecessary
>   comment in the device tree binding
>
> Changes since v2:
> - struct "s3cmci_drv_data" and flag "is2440" renamed
> - copying the whole driver data struct instead of only its member so
>   it will be easier to extend the information in the future
> - using mmc_of_parse() to read "cd-gpios" and "wp-gpios" properties
>   from device tree
>
> Changes since v1:
> - pinctrl description removed from DT binding
> - unit and label on DT binding renamed to mmc
>
> Sergio Prado (2):
>   dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller
>   mmc: host: s3cmci: allow probing from device tree
>
>  .../devicetree/bindings/mmc/samsung,s3cmci.txt     |  42 ++++
>  drivers/mmc/host/s3cmci.c                          | 257 ++++++++++-----------
>  2 files changed, 168 insertions(+), 131 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
>
> --
> 1.9.1
>


Thanks, applied for next!

Kind regards
Uffe