[linux-sunxi] [PATCH v4 3/8] phy: sun4i-usb: add PHYCTL offset for H3 SoC

Chen-Yu Tsai wens at csie.org
Thu Mar 23 23:55:44 PDT 2017


On Fri, Mar 24, 2017 at 2:27 PM, Icenowy Zheng <icenowy at aosc.xyz> wrote:
>
>
> 24.03.2017, 11:05, "Chen-Yu Tsai" <wens at csie.org>:
>> On Mon, Mar 20, 2017 at 12:19 AM, Icenowy Zheng <icenowy at aosc.xyz> wrote:
>>>  The config structure of H3 in phy-sun4i-usb driver have the PHYCTL
>>>  register offset missing.
>>>
>>>  Add it. Because it's a SoC after A33, its PHYCTL offset should be 0x10.
>>
>> You are implying that all SoCs after A33 have PHYCTL at 0x10.
>>
>> This is not true. As the A83T, which was released after the A33, has
>> PHYCTL at the old offset.
>
> No, in Allwinner's BSP A83T is using also PHYCTL at 0x10.
>
> The code in linux-3.4/drivers/usb/sunxi_usb/include/sunxi_usb_bsp.c is
> ```
> #if defined (CONFIG_ARCH_SUN8IW5) || defined (CONFIG_ARCH_SUN8IW6) || defined (CONFIG_ARCH_SUN8IW9) || defined (CONFIG_ARCH_SUN8IW8) || defined (CONFIG_ARCH_SUN8IW7)
> #define  USBPHYC_REG_o_PHYCTL               0x0410
> #else
> #define  USBPHYC_REG_o_PHYCTL               0x0404
> #endif
> ```
>
> In linux-3.10/drivers/usb/sunxi_usb/include/sunxi_usb_bsp.c is
> ```
> #if defined (CONFIG_ARCH_SUN50I) || defined (CONFIG_ARCH_SUN8IW10) || defined (CONFIG_ARCH_SUN8IW11)
> #define  USBPHYC_REG_o_PHYCTL               0x0410
> #else
> #define  USBPHYC_REG_o_PHYCTL               0x0404
> #endif
> ```
>
> So sun50i* and sun50iw5~w11 all use PHYCTL at 0x10.
>

Seems you are right. However I think it's best to not assume or infer
anything. Who knows, Allwinner might re-release some old SoC under a
different under a different name again.

Just state the facts: H3 has its PHYCTL at 0x10.

ChenYu

>>
>> Just state that H3 has PHYCTL at 0x10.
>>
>> ChenYu
>>
>>>  Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
>>>  ---
>>>  New patch in v4.
>>>
>>>   drivers/phy/phy-sun4i-usb.c | 1 +
>>>   1 file changed, 1 insertion(+)
>>>
>>>  diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
>>>  index 62b4d25448c6..a650f283f6ff 100644
>>>  --- a/drivers/phy/phy-sun4i-usb.c
>>>  +++ b/drivers/phy/phy-sun4i-usb.c
>>>  @@ -821,6 +821,7 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
>>>          .num_phys = 4,
>>>          .type = sun8i_h3_phy,
>>>          .disc_thresh = 3,
>>>  + .phyctl_offset = REG_PHYCTL_A33,
>>>          .dedicated_clocks = true,
>>>          .enable_pmu_unk1 = true,
>>>   };
>>>  --
>>>  2.12.0
>>>
>>>  --
>>>  You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
>>>  To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
>>>  For more options, visit https://groups.google.com/d/optout.
>>
>> --
>> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
>> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.



More information about the linux-arm-kernel mailing list