[PATCH V2 1/2] dt-bindings: thermal: add support for Broadcom's Northstar thermal

[Rafał Miłecki]

From: Rafał Miłecki <rafal at milecki.pl>

This commit documents binding for thermal used in Northstar family SoCs.

Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
 .../devicetree/bindings/thermal/brcm,ns-thermal         | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/brcm,ns-thermal

diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal
new file mode 100644
index 000000000000..9a22dd76ec01
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal
@@ -0,0 +1,17 @@
+* Broadcom Northstar Thermal
+
+This binding describes thermal sensor that is part of Northstar's DMU (Device
+Management Unit).
+
+Required properties:
+- compatible : Must be "brcm,ns-thermal"
+- reg : iomem address range of PVTMON registers
+- #thermal-sensor-cells : Should be <0>
+
+Example:
+
+thermal {
+	compatible = "brcm,ns-thermal";
+	reg = <0x1800c2c0 0x10>;
+	#thermal-sensor-cells = <0>;
+};
-- 
2.11.0