[PATCH v2 2/4] mvebu: xp: Add pwm properties to .dtsi files

[Gregory CLEMENT]

Hi Ralph,
 
 On sam., mars 18 2017, Ralph Sennhauser <ralph.sennhauser at gmail.com> wrote:

It seems that I don't receive the 1st patch of the series.

Also could you refresh my mind to expose why these patchse were not
apply the first time and why we should apply them now?

Thanks,

Gregory


> From: Andrew Lunn <andrew at lunn.ch>
>
> Add properties to the gpio nodes to allow them to be also used as pwm
> lines.
>
> Signed-off-by: Andrew Lunn <andrew at lunn.ch>
> URL: https://patchwork.ozlabs.org/patch/427294/
> Signed-off-by: Ralph Sennhauser <ralph.sennhauser at gmail.com>
> ---
>  arch/arm/boot/dts/armada-370.dtsi        | 10 ++++++++--
>  arch/arm/boot/dts/armada-xp-mv78230.dtsi | 10 ++++++++--
>  arch/arm/boot/dts/armada-xp-mv78260.dtsi |  8 ++++++--
>  arch/arm/boot/dts/armada-xp-mv78460.dtsi | 10 ++++++++--
>  4 files changed, 30 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
> index cc011c8..aa9fe72 100644
> --- a/arch/arm/boot/dts/armada-370.dtsi
> +++ b/arch/arm/boot/dts/armada-370.dtsi
> @@ -138,24 +138,30 @@
>  
>  			gpio0: gpio at 18100 {
>  				compatible = "marvell,orion-gpio";
> -				reg = <0x18100 0x40>;
> +				reg = <0x18100 0x40>, <0x181c0 0x08>;
> +				reg-names = "gpio", "pwm";
>  				ngpios = <32>;
>  				gpio-controller;
>  				#gpio-cells = <2>;
> +				#pwm-cells = <2>;
>  				interrupt-controller;
>  				#interrupt-cells = <2>;
>  				interrupts = <82>, <83>, <84>, <85>;
> +				clocks = <&coreclk 0>;
>  			};
>  
>  			gpio1: gpio at 18140 {
>  				compatible = "marvell,orion-gpio";
> -				reg = <0x18140 0x40>;
> +				reg = <0x18140 0x40>, <0x181c8 0x08>;
> +				reg-names = "gpio", "pwm";
>  				ngpios = <32>;
>  				gpio-controller;
>  				#gpio-cells = <2>;
> +				#pwm-cells = <2>;
>  				interrupt-controller;
>  				#interrupt-cells = <2>;
>  				interrupts = <87>, <88>, <89>, <90>;
> +				clocks = <&coreclk 0>;
>  			};
>  
>  			gpio2: gpio at 18180 {
> diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
> index 07c5090..fc3934f 100644
> --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
> +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
> @@ -203,24 +203,30 @@
>  		internal-regs {
>  			gpio0: gpio at 18100 {
>  				compatible = "marvell,orion-gpio";
> -				reg = <0x18100 0x40>;
> +				reg = <0x18100 0x40>, <0x181c0 0x08>;
> +				reg-names = "gpio", "pwm";
>  				ngpios = <32>;
>  				gpio-controller;
>  				#gpio-cells = <2>;
> +				#pwm-cells = <2>;
>  				interrupt-controller;
>  				#interrupt-cells = <2>;
>  				interrupts = <82>, <83>, <84>, <85>;
> +				clocks = <&coreclk 0>;
>  			};
>  
>  			gpio1: gpio at 18140 {
>  				compatible = "marvell,orion-gpio";
> -				reg = <0x18140 0x40>;
> +				reg = <0x18140 0x40>, <0x181c8 0x08>;
> +				reg-names = "gpio", "pwm";
>  				ngpios = <17>;
>  				gpio-controller;
>  				#gpio-cells = <2>;
> +				#pwm-cells = <2>;
>  				interrupt-controller;
>  				#interrupt-cells = <2>;
>  				interrupts = <87>, <88>, <89>;
> +				clocks = <&coreclk 0>;
>  			};
>  		};
>  	};
> diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
> index 64e936a..04dda6a 100644
> --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
> +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
> @@ -286,24 +286,28 @@
>  		internal-regs {
>  			gpio0: gpio at 18100 {
>  				compatible = "marvell,orion-gpio";
> -				reg = <0x18100 0x40>;
> +				reg = <0x18100 0x40>, <0x181c0 0x08>;
> +				reg-names = "gpio", "pwm";
>  				ngpios = <32>;
>  				gpio-controller;
>  				#gpio-cells = <2>;
> +				#pwm-cells = <2>;
>  				interrupt-controller;
>  				#interrupt-cells = <2>;
>  				interrupts = <82>, <83>, <84>, <85>;
> +				clocks = <&coreclk 0>;
>  			};
>  
>  			gpio1: gpio at 18140 {
>  				compatible = "marvell,orion-gpio";
> -				reg = <0x18140 0x40>;
> +				reg = <0x18140 0x40>, <0x181c8 0x08>;
>  				ngpios = <32>;
>  				gpio-controller;
>  				#gpio-cells = <2>;
>  				interrupt-controller;
>  				#interrupt-cells = <2>;
>  				interrupts = <87>, <88>, <89>, <90>;
> +				clocks = <&coreclk 0>;
>  			};
>  
>  			gpio2: gpio at 18180 {
> diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
> index d1383dd..fb6d28a 100644
> --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
> +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
> @@ -324,24 +324,30 @@
>  		internal-regs {
>  			gpio0: gpio at 18100 {
>  				compatible = "marvell,orion-gpio";
> -				reg = <0x18100 0x40>;
> +				reg = <0x18100 0x40>, <0x181c0 0x08>;
> +				reg-names = "gpio", "pwm";
>  				ngpios = <32>;
>  				gpio-controller;
>  				#gpio-cells = <2>;
> +				#pwm-cells = <2>;
>  				interrupt-controller;
>  				#interrupt-cells = <2>;
>  				interrupts = <82>, <83>, <84>, <85>;
> +				clocks = <&coreclk 0>;
>  			};
>  
>  			gpio1: gpio at 18140 {
>  				compatible = "marvell,orion-gpio";
> -				reg = <0x18140 0x40>;
> +				reg = <0x18140 0x40>, <0x181c8 0x08>;
> +				reg-names = "gpio", "pwm";
>  				ngpios = <32>;
>  				gpio-controller;
>  				#gpio-cells = <2>;
> +				#pwm-cells = <2>;
>  				interrupt-controller;
>  				#interrupt-cells = <2>;
>  				interrupts = <87>, <88>, <89>, <90>;
> +				clocks = <&coreclk 0>;
>  			};
>  
>  			gpio2: gpio at 18180 {
> -- 
> 2.10.2
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com