[PATCH v6 03/14] mmc: core: Add mmc-card dt sub-node parse in core layer

Gregory CLEMENT gregory.clement at free-electrons.com
Wed Mar 22 10:11:14 PDT 2017


Hi Ulf,
 
 On mer., mars 15 2017, Ulf Hansson <ulf.hansson at linaro.org> wrote:

> On 14 February 2017 at 18:01, Gregory CLEMENT
> <gregory.clement at free-electrons.com> wrote:
>> From: Hu Ziji <huziji at marvell.com>
>>
>> Some vendor host, like Xenon, can support multiple types.
>> In dts, use mmc-card dt sub-node to indicate eMMC is in use.
>>
>> Add a generic mmc-card parse function in mmc core layer.
>> If mmc-card sub-node is detected, set eMMC common caps, such as
>> MMC_CAP_NONREMOVABLE, MMC_CAP2_NO_SD and MMC_CAP2_NO_SDIO.
>>
>> Since it is likely that struct mmc_card is not allocated yet when
>> this mmc-card parse function is called, it will return true if
>> mmc-card sub-node is detected. Otherwise, return false.
>> It can help vendor host determine if the card type is eMMC.
>>
>> Signed-off-by: Hu Ziji <huziji at marvell.com>
>> Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
>> ---
>>  drivers/mmc/core/mmc.c   | 24 ++++++++++++++++++++++++
>>  include/linux/mmc/core.h |  2 ++
>>  2 files changed, 26 insertions(+)
>>
>> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
>> index b61b52f9da3d..dc480006a303 100644
>> --- a/drivers/mmc/core/mmc.c
>> +++ b/drivers/mmc/core/mmc.c
>> @@ -2111,6 +2111,30 @@ static const struct mmc_bus_ops mmc_ops = {
>>  };
>>
>>  /*
>> + * Parse mmc-card dt sub-node and set eMMC common caps
>> + * if mmc-card exists.
>> + * If mmc-card is detected, return true.
>> + * Otherwise, return false.
>> + */
>> +bool mmc_of_parse_mmc_card(struct mmc_host *host)
>> +{
>> +       struct device_node *np;
>> +       bool ret = false;
>> +
>> +       np = mmc_of_find_child_device(host, 0);
>
> There are already some places in the mmc core where child nodes are
> being parsed. You may have a look for mmc_of_find_child_device() and
> find the callers of it.

mmc_of_find_child_device is called in 3 places:

 - in mmc_add_card() from drivers/mmc/core/bus.c to populate the of_node
   field of card->dev. Here we don't care of the mmc-card property

 - in mmc_decode_ext_csd() from drivers/mmc/core/mmc.c, here the purpose
   is exactly to check if the mmc-card property is present so we could
   replace it by mmc_of_parse_mmc_card().

 - in sdio_set_of_node from drivers/mmc/core/sdio_bus.c to populate the
   of_node field of func->dev. Here again, we don't care of the mmc-card
   property

So in one case we could use the same function but for the 2 other cases
continue to use mmc_of_find_child_device() alone make sens.

>
> Additionally, we need a generic method of how to describe in DT, when
> an mmc host controller has more than one mmc slot. This will also be
> done using child nodes.
>
> So, before starting hacking on this, it seems like we need some
> consolidation of the code. In principle, I would like to move the APIs
> for parsing of the child nodes into host.c, along with existing
> mmc_of_parse() function.

I understand that you want consolidate this subsystem but it seems
beyond the this series. I would not want that the merge of this driver
will be delayed more because of it. We submitted the first version 5
month ago now, made several changes and we will reach the 7th
version. Along these version we also already contribute to improve the
mmc subsystem. I agree to work on the change you want, but I would like
not depending of it to merge this series.

We will address all the other comment on v6 from you and Andrian for a
v7. And for this patch we can:

 - keep it as is and only modify the mmc_decode_ext_csd() to use
   mmc_of_find_child_device().

 - Moving it back inside our driver waiting for a better API in the mmc
   subsystem.

What would be your preference?

>
>> +       if (np && of_device_is_compatible(np, "mmc-card")) {
>> +               /* mmc-card sub-node indicates eMMC card is in use. */
>> +               host->caps |= MMC_CAP_NONREMOVABLE;
>> +               host->caps2 |= MMC_CAP2_NO_SDIO | MMC_CAP2_NO_SD;
>> +               ret = true;
>> +       }
>> +
>
> So instead of providing a new mmc OF parse API, let's make
> mmc_of_parse() call another internal function which deals with child
> node parsing.

As the driver need to know if the card is an emmc then we need to alos
expose this information in one of the mmc structure, waht about "struct
mmc_host"?

Thanks,

Gregory


>
>> +       of_node_put(np);
>> +       return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(mmc_of_parse_mmc_card);
>> +
>> +/*
>>   * Starting point for MMC card init.
>>   */
>>  int mmc_attach_mmc(struct mmc_host *host)
>> diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
>> index e33cc748dcfe..1b27323f3b6e 100644
>> --- a/include/linux/mmc/core.h
>> +++ b/include/linux/mmc/core.h
>> @@ -234,4 +234,6 @@ struct device_node;
>>  extern u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max);
>>  extern int mmc_of_parse_voltage(struct device_node *np, u32 *mask);
>>
>> +extern bool mmc_of_parse_mmc_card(struct mmc_host *host);
>> +
>>  #endif /* LINUX_MMC_CORE_H */
>> --
>> git-series 0.9.1
>
> If you didn't quite understand my comments, then please tell me. Then
> I can help out cooking some patches for you.
>
> Kind regards
> Uffe

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com



More information about the linux-arm-kernel mailing list