[PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree
Keerthy
j-keerthy at ti.com
Tue Mar 21 20:42:47 PDT 2017
On Thursday 09 March 2017 01:35 PM, Keerthy wrote:
> Currently the slope and offset values for calculating the
> hot spot temperature of a particular thermal zone is part
> of driver data. Pass them here instead and obtain the values
> while of node parsing.
>
> Tested for the slope and constant values on DRA7-EVM, OMAP3-BEAGLE.
Hi Eduardo,
If the series looks okay could you please pull this?
Regards,
Keerthy
>
> Changes in v2:
>
> * Added OMAP3 changes along with DRA7/OMAP4/OMAP5.
>
> Keerthy (8):
> arm: dts: omap3: Add cpu_thermal zone
> ARM: DRA7: Thermal: Add slope and offset values
> ARM: OMAP5: Thermal: Add slope and offset values
> ARM: OMAP443x: Thermal: Add slope and offset values
> ARM: OMAP4460: Thermal: Add slope and offset values
> thermal: ti-soc-thermal: Fetch slope and offset from DT
> thermal: ti-soc-thermal: Remove redundant constants
> thermal: ti-soc-thermal: Remove redundant code
>
> arch/arm/boot/dts/dra7.dtsi | 17 +++
> arch/arm/boot/dts/omap3-cpu-thermal.dtsi | 20 +++
> arch/arm/boot/dts/omap34xx.dtsi | 8 +-
> arch/arm/boot/dts/omap36xx.dtsi | 8 +-
> arch/arm/boot/dts/omap443x.dtsi | 4 +
> arch/arm/boot/dts/omap4460.dtsi | 4 +
> arch/arm/boot/dts/omap5.dtsi | 9 ++
> .../thermal/ti-soc-thermal/dra752-thermal-data.c | 10 --
> .../thermal/ti-soc-thermal/omap3-thermal-data.c | 4 -
> .../thermal/ti-soc-thermal/omap4-thermal-data.c | 6 -
> .../thermal/ti-soc-thermal/omap5-thermal-data.c | 4 -
> drivers/thermal/ti-soc-thermal/ti-bandgap.h | 4 -
> drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 158 +--------------------
> drivers/thermal/ti-soc-thermal/ti-thermal.h | 16 ---
> 14 files changed, 71 insertions(+), 201 deletions(-)
> create mode 100644 arch/arm/boot/dts/omap3-cpu-thermal.dtsi
>
More information about the linux-arm-kernel
mailing list