[PATCH v3 02/11] ARM: sun8i: a33: add all operating points

[Chen-Yu Tsai]

On Tue, Mar 21, 2017 at 11:36 PM, Quentin Schulz
<quentin.schulz at free-electrons.com> wrote:
> This adds almost all operating points allowed for the A33 as defined by
> fex files available at:
> https://github.com/linux-sunxi/sunxi-boards/tree/master/sys_config/a33
>
> There are more possible frequencies in this patch than there are in the
> fex files because the fex files only give an interval of possible
> frequencies for a given voltage. All supported frequencies are defined
> in the original driver code in Allwinner vendor tree.
>
> There are two missing frequencies though: 1104MHz and 1200MHz which
> require the CPU to have 1.32V supplied, which is higher than the default
> voltage.
>
> Without all A33 boards defining the CPU regulator, we cannot have these
> two frequencies as it would cause the CPU to try to run a higher
> frequency without "overvolting" which is very likely to crash the CPU.
>
> Therefore, these two frequencies must be enabled on a per-board basis.
>
> Signed-off-by: Quentin Schulz <quentin.schulz at free-electrons.com>

Acked-by: Chen-Yu Tsai <wens at csie.org>