[PATCH 10/15] ARM: dts: bcm: fix msi-controller name and unit address

[Rob Herring]

The unit address for the msi controller is not valid as there is no reg
property, so remove it. Also, msi-controller is the preferred node name.

Signed-off-by: Rob Herring <robh at kernel.org>
Cc: Ray Jui <rjui at broadcom.com>
Cc: Scott Branden <sbranden at broadcom.com>
Cc: Jon Mason <jonmason at broadcom.com>
Cc: bcm-kernel-feedback-list at broadcom.com
---
Sub-arch maintainers, please apply to your trees unless arm-soc wants 
to take the whole lot.

 arch/arm/boot/dts/bcm-cygnus.dtsi | 4 ++--
 arch/arm/boot/dts/bcm-nsp.dtsi    | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 8833a4c3cd96..9644fddb5e3c 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -205,7 +205,7 @@
 			status = "disabled";
 
 			msi-parent = <&msi0>;
-			msi0: msi at 18012000 {
+			msi0: msi-controller {
 				compatible = "brcm,iproc-msi";
 				msi-controller;
 				interrupt-parent = <&gic>;
@@ -240,7 +240,7 @@
 			status = "disabled";
 
 			msi-parent = <&msi1>;
-			msi1: msi at 18013000 {
+			msi1: msi-controller {
 				compatible = "brcm,iproc-msi";
 				msi-controller;
 				interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 832795b0fd0f..42c017df490f 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -450,7 +450,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi0>;
-		msi0: msi at 18012000 {
+		msi0: msi-controller {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
@@ -486,7 +486,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi1>;
-		msi1: msi at 18013000 {
+		msi1: msi-controller {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
@@ -522,7 +522,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi2>;
-		msi2: msi at 18014000 {
+		msi2: msi-controller {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
-- 
2.10.1