[PATCH 3/5] clk: meson-gxbb: Add GXL/GXM GP0 Variant
Michael Turquette
mturquette at baylibre.com
Tue Mar 21 16:49:56 PDT 2017
Hi Neil,
Quoting Neil Armstrong (2017-03-13 06:26:42)
> @@ -821,6 +893,7 @@ struct pll_params_table gxbb_gp0_params_table[] = {
> &gxbb_hdmi_pll,
> &gxbb_sys_pll,
> &gxbb_gp0_pll,
> + &gxl_gp0_pll,
Is there a reason for adding the pointer to this array here? It seems to
me that the gxbb_gp0_pll and gxl_gp0_pll are mutually exclusive, so
perhaps two different tables should be used?
> };
>
> static struct meson_clk_mpll *const gxbb_clk_mplls[] = {
> @@ -923,6 +996,10 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
> struct clk *parent_clk;
> struct device *dev = &pdev->dev;
>
> + /* Override GP0 clock for GXL/GXM */
> + if (of_device_is_compatible(dev->of_node, "amlogic,gxl-clkc"))
> + gxbb_hw_onecell_data.hws[CLKID_GP0_PLL] = &gxl_gp0_pll.hw;
Similarly, this above is a little ugly compared to dedicated tables for
each variant.
Regards,
Mike
> +
> /* Generic clocks and PLLs */
> clk_base = of_iomap(dev->of_node, 0);
> if (!clk_base) {
> @@ -996,6 +1073,7 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
>
> static const struct of_device_id gxbb_clkc_match_table[] = {
> { .compatible = "amlogic,gxbb-clkc" },
> + { .compatible = "amlogic,gxl-clkc" },
> { }
> };
>
> diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h
> index 8ee2022..7f99bf6 100644
> --- a/drivers/clk/meson/gxbb.h
> +++ b/drivers/clk/meson/gxbb.h
> @@ -71,6 +71,8 @@
> #define HHI_GP0_PLL_CNTL2 0x44 /* 0x11 offset in data sheet */
> #define HHI_GP0_PLL_CNTL3 0x48 /* 0x12 offset in data sheet */
> #define HHI_GP0_PLL_CNTL4 0x4c /* 0x13 offset in data sheet */
> +#define HHI_GP0_PLL_CNTL5 0x50 /* 0x14 offset in data sheet */
> +#define HHI_GP0_PLL_CNTL1 0x58 /* 0x16 offset in data sheet */
>
> #define HHI_XTAL_DIVN_CNTL 0xbc /* 0x2f offset in data sheet */
> #define HHI_TIMER90K 0xec /* 0x3b offset in data sheet */
> --
> 1.9.1
>
More information about the linux-arm-kernel
mailing list